stokedgraphics 1 Posted March 14, 2011 I'm using AI10 with an Epson workforce 1100. I'm printing on blank white matte finish invitations that are 10x6.5 overall (to be folded to 5x6.5). My issue is that the print is not centering. Already set the page parameters in the Epson printer properties and set the print to landscape. The print size is good, but the borders are uneven (the image is not in the center of the panel). Not sure if this is an AI issue or a printer issue, but it's most likely an "operator headspace and timing" issue... Any help is greatly appreciated. This order needs to be out by COB tomorrow! Thanks Stoked On Graphics P.S. I tried printing through Fireworks, Photoshop, and the Epson photoprint program with varied results but no solution. Share this post Link to post Share on other sites
hockeygirl 30 Posted March 21, 2011 Was your Artboard size set correctly in AI? Share this post Link to post Share on other sites
stokedgraphics 1 Posted March 22, 2011 Was your Artboard size set correctly in AI? I figured it out with a little help from Richard at Cobra Ink Systems (where I purchased the printer). Thanks for the response, though! Share this post Link to post Share on other sites