m33mcg 0 Posted February 11, 2011 Tried to watch the video post but it seems to be gone. I have read the instucturial post step by step. I have gotten to the print/ cut and to the lazer alignment step. Here is were the problem happens. No movement / will not jog. I know a couple of people had the same problems, but how did you fix it? I am stuck with a big transfer job and sinking fast time is running out don't want to lose a customer. Thanks for any help. Mike Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted February 11, 2011 there is a video here at the bottom http://www.uscutter.com/USCutter-LaserPoint-Vinyl-Cutter-w-CONTOUR-CUTTING-Feature-_p_567.html here is a thread http://forum.uscutter.com/index.php/topic,8986.0.html Share this post Link to post Share on other sites
m33mcg 0 Posted February 11, 2011 Skeeter, thanks for all your help, thats what makes this a great forum. The answer to my jog problem: Is that I am using a laptop without a numbers pad on the key board. Use the caps lock. It solved that problem. Ok I have a new question: What is the "Redeye Offset - Carriage direction" and what sould be the setting? mine was at 3.00 What is the "Redeye Offset - Vinyl direction" and its setting number? mine is at 0.00 I know thats the wrong setting. Thanks again Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted February 11, 2011 a search got that answer http://forum.uscutter.com/index.php/topic,5583.0.html Share this post Link to post Share on other sites