dinki 3 Posted January 31, 2011 Creating some 'skins' for cellphones, game consoles, ebook readers, etc for some people I work with. I saw someone selling some on Ebay that appeared to be printed vinyl that was removable/repositionable. Where can I get this vinyl? Do you know what type of printer (laser/inkjet) I would need to print on? I assume I'd use my cutter to contour cut the vinyl after the design has been printed? Any help is greatly appreciated. Share this post Link to post Share on other sites
cutme 5 Posted January 31, 2011 papilio has some inkjet and lazer printable materials. you would have to laminate them after printing. bb http://www.papilio.com/ Share this post Link to post Share on other sites
dinki 3 Posted January 31, 2011 Thanks for the info. Could I layer clear vinyl on the top of the printed vinyl after it has been weeded? I'm thinking weed it then layer a piece of clear and then recontour cut it to final product? Share this post Link to post Share on other sites
Booper 2 Posted January 31, 2011 Why bother running it thru twice I print then lam & THEN run it thru the cutter with higher a pressure setting & it cuts both just fine. It kills yer blade but keep one blade for contour cutting & another one for fine detail vinyl work. Share this post Link to post Share on other sites
cutme 5 Posted January 31, 2011 get clean cut blades and you won't need to switch blades back and forth. bb Share this post Link to post Share on other sites
dinki 3 Posted January 31, 2011 I've never laminated. Will I get similar results with clear vinyl? Share this post Link to post Share on other sites
