jmatson 2 Posted July 19, 2010 I have a local company doing my work. but they are taking way to long. and need some help.. I have the logo (picture) hoping someone can help me out. They are doing it on printed vinyl. I;m cheap and can't afford that machine So i have to do it layered Pls let me know if you can help.. http://redrivertaxi.com/4aces.jpg Share this post Link to post Share on other sites
rotten 0 Posted July 20, 2010 Holy smokes. Looks like a heck of a trace to do. Better send it out to a hired gun like Joe camaro. Share this post Link to post Share on other sites
mark-s 1,126 Posted July 20, 2010 Yep you`d better farm that out to a pro mark-s Share this post Link to post Share on other sites
jmatson 2 Posted July 20, 2010 ya i emailed it to Joe yesterday also. I called the local company and they won't touch my cars until it stops raining. They got a shop but don't apply vinyl until the sun is shining. Share this post Link to post Share on other sites
mars 45 Posted July 20, 2010 Just thinking here -- did you offer to buy the graphic file from the shop you had been using. If they can't meet your time requirements they might sell you the file for you to use. If not, from the comments I see about it on the forums Joe does great work - at a fair price -- good luck with it. I played with tracing it last night for a few minutes - you will have better luck if you snap a picture of the design without all the water drops. I got a decent trace, but there are lots of spots that have to be removed - too much work to do just for fun - so I quit on it. -Mike Share this post Link to post Share on other sites
jmatson 2 Posted July 20, 2010 Ya i asked. and they said no. i'll try and get a pic today on my other cam. that was on my iphone Share this post Link to post Share on other sites
drakesis 1 Posted August 2, 2010 How did the job turn out....? Share this post Link to post Share on other sites
jmatson 2 Posted August 2, 2010 it turned out great 4 aces .ai 4 aces .ai Share this post Link to post Share on other sites