segmkc 0 Posted June 22, 2010 I have 2 zip files of OSU and Michigan items that I can't get to open in SBE. Someone said they need to be converted? Maybe I'm doing something wrong with extracting and saving the files. Can anyone help? http://rapidshare.com/files/399475791/BSOh.zip.html MichiganWolverines.zip MichiganWolverines.zip Share this post Link to post Share on other sites
BannerJohn 1,324 Posted June 22, 2010 you have to unzip them first. Share this post Link to post Share on other sites
segmkc 0 Posted June 22, 2010 I do. I extract files and save them in my SignBlazer folders. I try to open and have no luck Share this post Link to post Share on other sites
BannerJohn 1,324 Posted June 22, 2010 SB can be funny. Try to copy and paste the file rather than import. Share this post Link to post Share on other sites
pogo 0 Posted June 22, 2010 Make sure you are using the import command instead of open. I'm blocked from rapidshare at work but the 2nd file you attached imported just fine. Share this post Link to post Share on other sites
segmkc 0 Posted June 22, 2010 I thought I had been using import. Can someone walk me through the steps from unzipping to opening in SBE? Maybe I'm missing something. I'd really, really appreciate it. Share this post Link to post Share on other sites
segmkc 0 Posted June 22, 2010 Copy and paste from where to where? Share this post Link to post Share on other sites
pogo 0 Posted June 22, 2010 Here are the steps I took to load MichiganWolverines.zip 1. Unzip the file to a location on your hard drive. The unzipped file is MichiganWolverines.ai 2. Open Signblazer. Click File menu then the Import command. 3. Browse to the folder containing MichiganWolverines.ai 4. Select the file and click OK. 5. Click Use full postscript interpreter. File should now be loaded. Share this post Link to post Share on other sites
segmkc 0 Posted June 23, 2010 How do I then isolate one logo/image to cut? I got it to open (thanks), but I get about 20 small logos Share this post Link to post Share on other sites
tinaski 11 Posted June 23, 2010 In inkscape I just use node edit and del all the nodes from the other images Share this post Link to post Share on other sites
cutme 5 Posted June 24, 2010 or you can split the objects and then delete at will... bb Share this post Link to post Share on other sites