Guest fivestar Posted June 23, 2010 Got samples in a couple weeks ago of Imprintables spectra cut to try.cut out my logo to print a shirt for advertisement only to find I loaded the spectra cut in upside down,cutting the carrier,ruining 10" 0f 12" sample,took out instructions out just before and put on table(who needs those anyway!)DUMMY!!!! Best thing that could of happened to you. Don't use that JUNK STUFF. Share this post Link to post Share on other sites
prestonservco 26 Posted June 24, 2010 Last week I helping a friend make some T-Shirts with heat press vinyl. His design was very detailed and had 2 layers, so I had him and another friend do all the weeding. Took the two of them an hour to weed vinyl for 4 shirts. Then I noticed that I had forgot to mirror cut the design. ARGH! Sorry Dudes! Share this post Link to post Share on other sites
FutureSgtsWife 0 Posted June 28, 2010 I just did "superman" shirts for one of the dance groups for a recital... and switched the red and yellow... 30 shirts. All cut/weeded.... thankfully NOT pressed. That sucked! Share this post Link to post Share on other sites
prestonservco 26 Posted July 2, 2010 Ok, so last week I was cutting something and working at the other end of the shop...then I realized I was cutting the wrong thing so I darted across the shop to stop the cutter. Of course I tripped on the leg of the cutter stand.....She never worked right again. After going through all the USCutter support troubleshooting, I find that the motherboard is R.I.P. Darn! Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted July 2, 2010 ouch!!! sorry to hear that. Now jump on a Graphtec Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted July 2, 2010 ouch!!! sorry to hear that. Now jump on a Graphtec +1 Share this post Link to post Share on other sites
SandyM114 0 Posted July 2, 2010 I enjoyed all the replies about silly mistakes...Have to say...I've done most of them also. My latest mistake was to make my lettering, cut it, and saved it. Went back in and thought, "Oh, let's make it a little larger..." Then placed my rhinestone circles so carefully just where I wanted them added to the lettering....Uh, hello.....Rhinestone template didn't ift my design I had already cut with the original size...Placed those rhinestones by hand, needless to say.lol Sandy Share this post Link to post Share on other sites
prestonservco 26 Posted July 8, 2010 So......Today I cut vinyl for an 8' banner.....in the wrong color. :- Share this post Link to post Share on other sites