c.broyles 4 Posted April 2, 2010 I just got a cutter and was making a in loving memory decal of my brother. i got it all drawn out on sign blazer. but when i go to cut it on the preview it shows all the words but not my symbol in the middle which is a oldsmobile symbol. what did i do wrong? if i knew how to post it on here i would so ya'll can see it. thanks,chris. Share this post Link to post Share on other sites
cutme 5 Posted April 2, 2010 is it a vector? do you have it selected in the cut screen? bb Share this post Link to post Share on other sites
c.broyles 4 Posted April 3, 2010 i got it off best brands of the world site, it's supposed to be vector. everything shows up but the oldsmobile symbol on the cut screen. Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted April 3, 2010 i got it off best brands of the world site, it's supposed to be vector. everything shows up but the oldsmobile symbol on the cut screen. to upload a picture, design etc, at the left of the reply box is ADDITIONAL Options, upload it there, Share this post Link to post Share on other sites
mr300s 1,272 Posted April 3, 2010 hold down ctrl on the red x on the left side where you see that arrow so that they are both picked and see if that works. Share this post Link to post Share on other sites
c.broyles 4 Posted April 3, 2010 thanks for the help, it's working now. now i have to find out why the vinyl is pinching around the rollers when it starts cutting. Share this post Link to post Share on other sites
cutme 5 Posted April 3, 2010 too much pressure (cutting downforce)? bb Share this post Link to post Share on other sites
c.broyles 4 Posted April 3, 2010 thanks it was set on 100g, i turned it down to 70g it's working great now. thanks Share this post Link to post Share on other sites