edge 67 Posted March 22, 2010 Obviously the Copam does not have a laser pointer for registration mark setting....... Just the same is it possible to use SignCut PRO with the contour feature to contour cut? I've never had a need to use this machine for that purpose and with a few xtra minutes this weekend tried that task...but found the SignCut PRO locking up during set-up for contour, wondered if it's driver issues that can be worked around, or operator error? Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted March 23, 2010 there is a posting somewhere on this forum for contouring with a p-cut or refine - same process - they use a pen tool to line up the registration marks. i am not familiar with the process but hopefully someone will chime in Share this post Link to post Share on other sites
CRD 9 Posted March 23, 2010 Regardless the machine is equipped with laser pointer or not the SC PRO advanced contour cut should work. Use the plotter pen first to align the three markers. You have to manual press the knifeholder arm down. At the third alignment mark exchange the plotterpen for the knife and then hit enter. It should contour cut. Paco Share this post Link to post Share on other sites