CATWOM1960 2 Posted December 10, 2009 I am having a problem with my vinyl when I am cutting it will not come straight out and straight back and it only happens when I cut big things would anyone know what the problem might be ?? any help would be great Thanks Bonnie Share this post Link to post Share on other sites
MZ SKEETER 4,710 Posted December 10, 2009 some more info would help, type cutter? cutting software,? are you talking about tracking the vinyl? How big? Share this post Link to post Share on other sites
CATWOM1960 2 Posted December 10, 2009 Sorry just so frustrated I have a Redine MH721 cutter software is WINPCpro and when I put the vinyl on the plotter the vinyl will not move straight froward and straight back size is 14" X 18" Share this post Link to post Share on other sites
mark-s 1,126 Posted December 10, 2009 sounds like pinch rollers are not the same force. mark-s Share this post Link to post Share on other sites
CATWOM1960 2 Posted December 10, 2009 ok this may sound stupid how do I know that they are all the same force I know how to change them just by turning them right Bonnie Share this post Link to post Share on other sites
mark-s 1,126 Posted December 10, 2009 Trial and error, I`d say what ever side is dragging tighten it say 1/2 turn at a time until it catches up to the lead side. Make sense? Don`t know never had that problem but sounds logical. maybe mark-s Share this post Link to post Share on other sites
gadget1961 5 Posted December 10, 2009 i had the same problem today, the middle pinch roller was right in the middle of the 2 rollers , which dont even turn stupid me all i saw was it tilting and one side comeing and other staying (maybe a crop circle) haha and going back , just what happened to me error of stupid human Share this post Link to post Share on other sites
midwaste 4 Posted December 10, 2009 Is it WAY off or just a few inches off on a long run of vinyl? Are you running it in and out a bit to make sure you have the vinyl aligned correctly before starting? Share this post Link to post Share on other sites
YadirellT 0 Posted December 10, 2009 Mark's suggestion is the best way to go at the moment. When you put the vinyl in, take it offline, and run it through a few times by using the up and down arrow on the cutter. See if the tracking on that holds. Share this post Link to post Share on other sites
sdgirl 13 Posted December 11, 2009 i had the same problem today, the middle pinch roller was right in the middle of the 2 rollers , which dont even turn stupid me all i saw was it tilting and one side comeing and other staying (maybe a crop circle) haha and going back , just what happened to me error of stupid human I did that to when I first started cutting! Share this post Link to post Share on other sites
CATWOM1960 2 Posted December 13, 2009 ok I think I got it fixed thanks for everyone's help I love this forum Bonnie Share this post Link to post Share on other sites