Junkman 0 Posted October 25, 2009 I am having trouble cutting a design. It is a set of crossed baseball bats and a large letter T. The bats are behind the T and started out as 2 seperate images. I combined the images, tried weld operation and still it cuts as if the 2 images are seperate and cuts through each other. I just want to cut the outside of the image and the small parts between the bat and T (open spaces) any help on combining these images would be greatly appreciated. Thank you Share this post Link to post Share on other sites
rodh2 16 Posted October 25, 2009 use the punch tool in sign blazer and punch the t through the bats then weld and see if this will work for you. Rod Share this post Link to post Share on other sites
rodh2 16 Posted October 25, 2009 If this does not work for you post the file and i will see if I can help. Rod Share this post Link to post Share on other sites
Junkman 0 Posted October 25, 2009 Thanks I will try it Share this post Link to post Share on other sites
Junkman 0 Posted October 28, 2009 That worked thanks Share this post Link to post Share on other sites
