In19944 0 Posted July 29, 2009 my laserpoint just stops mid-job and says "waiting" and then doesn't restart correctly. what should i do? thnx Doug Share this post Link to post Share on other sites
firemalt 10 Posted July 29, 2009 On one certain image, or anything you try to cut? Share this post Link to post Share on other sites
In19944 0 Posted July 30, 2009 Yes, it was a vectorized image of a flower that I pathed out. Does the intricacy make a difference? Thanks Doug Share this post Link to post Share on other sites
midwaste 4 Posted July 30, 2009 It works fine on other images? How big was the image you were cutting? How intricate are you talking? Intricacy could be a problem, but it would have to VERY detailed. Share this post Link to post Share on other sites
lynnpromotions 0 Posted August 4, 2009 if you are using usb then switch to serial and your problems will go away. Share this post Link to post Share on other sites
haumana 1,221 Posted August 5, 2009 several causes ... and possible solutions. original file is too big. it's better to import a small file and resize it once it's in SBE. usb cable could be vibrating loose. others have experienced this, and it seems that my LP is starting to do that too. swithing to a serial would solve this problem. (other) usb communication. if it we a bad usb connection i would guess that it would jam up your cuts on a consistent basis. Let us know how it goes. Share this post Link to post Share on other sites