Yones12 1 Posted July 15, 2009 I have a 34inch refine. when i go to cut, in flexi. it stops, and i hear that usb sound. what part is it that the usb plugs into? Share this post Link to post Share on other sites
kenimes 42 Posted July 15, 2009 On the cutter- it is the I/O board. Could be a bunk USB cable if you are using the one that came with the unit as well. Share this post Link to post Share on other sites
Yones12 1 Posted July 15, 2009 Tried the 2 different usbs still disconnectes and reconnects causing the job to stop. Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted July 15, 2009 do you also have have the cutter grounded to the stand?, if you have one, try taping the usb cable to the machine, so as not to vibrate. Share this post Link to post Share on other sites
Yones12 1 Posted July 15, 2009 tried still didnt work. It just started doing this last night, other than that never did it Share this post Link to post Share on other sites
kenimes 42 Posted July 16, 2009 Might need a new I/O board, unless you can switch to Serial. Share this post Link to post Share on other sites