Chris H. 0 Posted July 8, 2009 I am needing someome to vectorize these two graphics don't need the straight line just the other part or to please tell me how I can do this. I am using winpcsign2009pro Thanks you so much Chris H Share this post Link to post Share on other sites
Brandon_Davis 1 Posted July 9, 2009 Well get a solid direct picture and isolate just the graphic, that would be the first step... Secondly you can cheat and use VectorMagic.com ... Alternatively you can download a free copy of inkscape (from inkscape.org) and vectorized with their module that I happen to find very competent... Talk to me... Let me know how it turns out and if you need more instruction. Share this post Link to post Share on other sites
Chris H. 0 Posted July 9, 2009 I tried vectormagic couldn't get it to work for me. where to go to download inkscape at in that web site Share this post Link to post Share on other sites
Chris H. 0 Posted July 9, 2009 Just talked to the guy they already took the graphics off and replaced the panels so I want be able to get a direct pic. So if anyone could get it vectorize. THANKS SO MUCH Share this post Link to post Share on other sites
JoeBlow 5 Posted July 9, 2009 Chris, If you have brand name, try "Brands of the World". Share this post Link to post Share on other sites
Chris H. 0 Posted July 9, 2009 Nope not in best brands of the world first place I looked before posting in here Share this post Link to post Share on other sites
Chris H. 0 Posted July 9, 2009 HELP PLEASEEEEEEEEEEEEEEEEEEEEEEEEEE Share this post Link to post Share on other sites
Chris H. 0 Posted July 9, 2009 does anyone have anything close to these images don't have to be exact just look close Thanks Chris H Share this post Link to post Share on other sites
Jay2703 704 Posted July 9, 2009 Here, try these: pic2.EPS pic3.EPS Share this post Link to post Share on other sites
Chris H. 0 Posted July 9, 2009 THANK YOU THANK YOU JAY thanks for all the help Thanks Chris H. Share this post Link to post Share on other sites
Jay2703 704 Posted July 9, 2009 I used the polyline tool in SignBlazer to trace over the pictures. Share this post Link to post Share on other sites
Chris H. 0 Posted July 9, 2009 Looks like I am fixing to have to buy some more software so I can do this stuff for myself and help others out. Thanks again To all Share this post Link to post Share on other sites
Jay2703 704 Posted July 9, 2009 The fully functional trial version of SignBlazer is free to download from USCutter's website and here in this post: http://forum.uscutter.com/index.php/topic,19211.0.html Share this post Link to post Share on other sites
Hookster 0 Posted July 17, 2009 I've got winpc pro 2007 & if you go to the bitmap button it will drop down & there is a Vectorization button I'm sure the the 2009 version should have the same thing. This works good for me. Good Luck Mike Share this post Link to post Share on other sites