LLCE 0 Posted May 7, 2009 I have the side of a van to do. My cutter is 24" and the graphic is 48x48. I need to figure out how to cut the border in half and then splice it together. Any help would be appreciated. Share this post Link to post Share on other sites
Spyder Graphix 0 Posted May 11, 2009 Not sure how to do it in SB but i use Cibercut and ca splice it.. If you want to send me the EPS of it Ill do it for you and send it right back. rick@spydergraphix.com Share this post Link to post Share on other sites
SandyM114 0 Posted May 11, 2009 I did a heart that was wider than my vinyl and it tiled it. Then you just match it up...Sandy Share this post Link to post Share on other sites
Jay2703 704 Posted May 11, 2009 When you go to cut it, SignBlazer will automatically tile it if the graphic is larger than the vinyl. Just select the tile that you want to cut. There is also an overlap distance to set. Share this post Link to post Share on other sites
LLCE 0 Posted May 11, 2009 Thanks much for all the input. I will give it a try. Share this post Link to post Share on other sites
john! 1 Posted May 15, 2009 PLEASE let me know how this went. I have a 5x3' graphic to cut on my 24" machine and I'm going to turn it down possibly :- Share this post Link to post Share on other sites
Guest Schramm Posted May 15, 2009 John, Dont pass up work, I have a 50" machine and I would be happy to cut it for you! I can cut 48" with no problem. Share this post Link to post Share on other sites
vrtkevin 0 Posted June 20, 2009 one thing I have learned is never pass up work, you can always get help if needed. I also have a 36" and 54" plotter and a close friend that has a 60" printer plotter Share this post Link to post Share on other sites
Tempted Graphics 0 Posted June 20, 2009 Where it says tile to cut choose the one you want in the cut box Share this post Link to post Share on other sites
Nerdboy 0 Posted March 31, 2010 :thumbsup: ???I think we need more help with this topic from someone more familiar with Signblazer elements. I'm having the same issue. MH871 Refine 34"/PC Vista/USB/SignblazerElements My job is 24" x 13'. When I loaded my vectors as one tile, the cutter doled out 13', and crashed into the opposite side of the cutter. So I know I can just cut this job in an 8ft segment and a 5ft segment. I don't want to, because it'll mean a more difficult install, but I can definitely work around it. My question is about Tiling. There really are no "manual" options to set the tiling on this program. You control the tiling by your workspace, and then if you select a graphic larger than your workspace you can get more than one tile and adjust it that way. However, every time I've tried this, the cutter cuts the first tile, (I have it pause after cutting the first tile) pauses, and then returns to the home postion of tile 1 and starts to cut tile 2 overtop. Am I supposed to trim it in between? there's no cut line between the tiles- it seems like it should just pickup where it left off. Share this post Link to post Share on other sites
cohort 0 Posted April 2, 2010 In the settings, you can tell it to advance the home position after a tile is cut.. (lower left in image) Share this post Link to post Share on other sites