lingland 0 Posted May 1, 2009 I see SignBlazer has a settings of "Blade Offset" Can anyone break that down to me? What is it? Does Flexi have this setting too? Thanks Share this post Link to post Share on other sites
Jay2703 704 Posted May 1, 2009 See this post: http://forum.uscutter.com/index.php/topic,16152.msg127602.html#msg127602 Share this post Link to post Share on other sites
mars 45 Posted May 1, 2009 Not sure about flexi, but I bet is does. On my Copam CP-2500 there is a setting in the control panel for the offset - and there is a setting in signblazer also. Mine is set in the cutter to 0.25mm - and in signblazer to 0.0mm - no offset in signblazer. When I first installed signblazer I set it to 0.25 and it made the effective offset 0.50 (0.25 from cutter sand additional 0.25 from software) - too much and it made the cuts have ears or peaks. Set it back to 0.0 in signblazer and it cuts sweet!! -Mike Share this post Link to post Share on other sites
