lingland
Members-
Content Count
8 -
Joined
-
Last visited
Community Reputation
0 NeutralAbout lingland
-
Rank
Newbie
- Birthday 01/01/1
Profile Information
-
Gender
Not Telling
-
I see SignBlazer has a settings of "Blade Offset" Can anyone break that down to me? What is it? Does Flexi have this setting too? Thanks
-
Design Issue with cutter
lingland replied to aingrati's topic in LaserPoint Cutting Plotter Discussion
Just curious, In the top "O" of the number eight.. Is that someones head (with a beard) looking to the right? -
Yep... I was very scared jumping into a big cut right away... Luck of the draw everything worked great.
-
Aside from making a few 4inch cuts with (ahem) funny words, I jumped right to a 6 foot banner. Here is my first big cut. (My camera picture fades out the lilac against the white..) It came out better than I expected 6'x2' Banner. LaserPoiner cutter. Oracal 651.
-
I know this must be a user error... I'm using Oacal 651, and bgs application tape. I cut my stuff, weed the stuff I don't want, and then overlay the application tape. The part I cannot seem to get right is how do I remove the vinyl backing properly to get it to come off without the remaining vinyl? My vinyl backing won't let go... (With enough effort / fingernails I can get it, but if I do small detailed stuff, I can see me screwing up more than I would wan't) Whats the trick? Thanks Rob
-
LaserPoint 24" w/Stand - Whats Your Roller Width?
lingland replied to lingland's topic in LaserPoint Cutting Plotter Discussion
Bingo! That explains it. My rollers were too long. I cut my rollers down to 26 1/2" and everything now rolls. Thanks, Rob -
LaserPoint 24" w/Stand - Whats Your Roller Width?
lingland replied to lingland's topic in LaserPoint Cutting Plotter Discussion
But thats just it... Because my rollers (the aluminum roll, not the bearings) are 27 9/16" and the space betwen the bracets themselves are 27" The brackets jam/press right into the rollers making nothing roll. I'd still like to know someone elses roller measurements (ignoring the bearing parts). An uneducated guess on my side makes me think they *should* measure 26 9/16" giving a bit less than 1/2" of slop to let the rollers actuall roll. Thanks Rob -
LaserPoint 24" w/Stand - Whats Your Roller Width?
lingland posted a topic in LaserPoint Cutting Plotter Discussion
Just curious. I picked up a LaserPoint 24", and the rollers for the stand seem too big. My stand's inner dimensions are ~ 27in (I'd say 1/16th shorter than that.. but thats close enough). My rollers are 27 9/16th inches. I could jam the rollers in there but If I do so, they most certainly won't roll. Can anyone measure their rollers to give me an idea of what they should be? I cannot imagine I put the stand together wrongly... (but I'm sure I've done worse in the past..) Thanks Rob