john! 1 Posted April 9, 2009 Hey, i have a customer wanting stripes on his vehicle. Now the one section will be 5 foot long x 10" wide. Does anyone have any home made slitters that may work rather than using a straight edge? My machine won't stay on track for 5 feet cutting a straight line because it tapers when it comes back around even with new stripe and rollers. Thanks. Share this post Link to post Share on other sites
vectorman 0 Posted April 9, 2009 if its strips u shoud cut it hand made Share this post Link to post Share on other sites
vectorman 0 Posted April 12, 2009 10 inch is about 20 cm u can ask yuor suplayer to sliace 10 inch from your roll normaly its free from charge @@@@i wish there was a speling check around here @@@@@@@ Share this post Link to post Share on other sites
Jay2703 704 Posted April 12, 2009 @@@@i wish there was a speling check around here @@@@@@@ There is now. A button by where the "Post" button is. Share this post Link to post Share on other sites
JoeBlow 5 Posted April 12, 2009 Your Plotter should be able to cut that OK. Share this post Link to post Share on other sites