elited 0 Posted February 6, 2009 I have tried to make a test cut with my laserpoint, when I tried the test, it would cut 3 sides of the rectangle, so i re-adjusted my blade. I want to cut out letters for a jersey, when the cutter attempts to cut the vinyl "bunches" up! (i don't know if you understand bunches) my question is; Can I use thermo film vinyl with this cutter! Share this post Link to post Share on other sites
Guest fivestar Posted February 6, 2009 Not sure why your vinyl is "bunching up" but yes you can use thermo film vinyl with that cutter. Share this post Link to post Share on other sites
Guest Posted February 7, 2009 Sounds like your blade is out to far. Check this out: http://support.uscutter.com/index.php?_m=downloads&_a=viewdownload&downloaditemid=29&nav=0,10 Share this post Link to post Share on other sites
elited 0 Posted February 7, 2009 Okay, I have adjusted the blade, thank you for that info. I am now in search of a thread that reveals to me how to communicate with the laserpoint. When I click on the cut command in SBE, it simulates the cut lines on the screen, but it does nothing to the cutter. Share this post Link to post Share on other sites
elited 0 Posted February 7, 2009 HOORAAAY! I cut my first vinyl, Ifeel like we are all in rehab. Hi my name is Robert, and I made my first vinyl Cut! Share this post Link to post Share on other sites
DTFuqua 0 Posted February 8, 2009 I know the feeling Robert. And it jsut gets better as you gain knowledge and experiance. Good luck. Terry Share this post Link to post Share on other sites
firemalt 10 Posted February 8, 2009 Congrats on a sucessful cut, Robert! Share this post Link to post Share on other sites