Cre8tiveCutter 7 Posted January 29, 2009 I have purchased a pcut creation and i cannot figure out the directions for the floorstand....can someone help Share this post Link to post Share on other sites
firemalt 10 Posted January 29, 2009 didn't get a stand with my pcut... sorry, i can't offer ya any help on this one. if you mail me the stand, i'll put it together, and best out the quality for ya! Share this post Link to post Share on other sites
Cre8tiveCutter 7 Posted January 29, 2009 lol thanx anyways but imma try to get this thing right.......its halfway together now and i cant figure the rest out Share this post Link to post Share on other sites
firemalt 10 Posted January 29, 2009 FYI... you shouldn't have 3 bars and 12 screws left over! Share this post Link to post Share on other sites
Cre8tiveCutter 7 Posted January 29, 2009 lmao yeah figured that much....there are two brackets that hold the vinyl on the stand and i just cant seem how or where to mount them... Share this post Link to post Share on other sites
firemalt 10 Posted January 29, 2009 probably where those bolts holes are on the stand? Share this post Link to post Share on other sites
Cre8tiveCutter 7 Posted January 29, 2009 yeah there are bolt holes but they dont line up with the brackets Share this post Link to post Share on other sites
firemalt 10 Posted January 29, 2009 drill your own! Share this post Link to post Share on other sites
Cre8tiveCutter 7 Posted January 30, 2009 thanx fire! LOL!! Got it figured out....rather my son did, As others have stated the directions are NOT clear...lol. They really need to come up with clearer directions! Reminds me of when the kids were small, Christmas was terrible trying to figure out how to put things together only to have extra parts..LOL!! Nothing extra though on the stand, all parts are needed! Renee Share this post Link to post Share on other sites
sandman 5 Posted January 30, 2009 That thing was a pain in the butt to figure out but I'm pretty sure I got mine right. I'll try to take some pics of it tonight and post if that helps. Share this post Link to post Share on other sites
Cre8tiveCutter 7 Posted January 30, 2009 thanx sandman I think my son figured it out, will know for sure when I put the cutter on it! LOL Renee Share this post Link to post Share on other sites
sandman 5 Posted January 31, 2009 Just saw a sticky in the P cut support section on this. http://forum.uscutter.com/index.php/topic,2056.0.html Share this post Link to post Share on other sites
Cre8tiveCutter 7 Posted January 31, 2009 I saw it too sandman, one said his came with casters, mine did not, there is some talk about "o" rings, I have no idea what an o ring is and I'm pretty sure I didnt get those. My vinyl roll holder thingy looks totally different from the one in those pictures....lol, seems the stands keep changing so no wonder the directions are confusing! Renee Share this post Link to post Share on other sites
sandman 5 Posted January 31, 2009 O-rings are just a round piece of rubber. If your stand came with two chrome looking things with a flange on one side I think they intended the o-rings to go on those to keep them from sliding after you position them. I found if I removed them from the material rollers all together I can move the vinyl roll closer to the start position and cut all the way to the edge of 24" wide vinyl without hitting the red button that cancels the whole operation. At first I was running the back roller through the vinyl roll then I figured out I should just set the roll of vinyl on the two rollers. You need to pull off about what you think it will use or the feed will snatch the roll of vinyl off the rollers and it will land on the floor. No big deal, just an aggravation. Share this post Link to post Share on other sites
midwaste 4 Posted February 1, 2009 Dont worry about the chrome end pieces or the o-rings, you dont need them. As someone said earlier, you can get the rolls of vinyl closer to the 0 line on the cutter scale if you dont use them. Share this post Link to post Share on other sites
Cre8tiveCutter 7 Posted February 1, 2009 I'm doing what was suggested on here in a few other threads and that is lay the roll of vinyl on top of the rollers rather than put the roller thru the vinyl seems to be working! Renee Share this post Link to post Share on other sites
zx360 0 Posted September 19, 2009 Does anyone have any pictures of their stand complete? i have everything up, but the 2 rollers that came with it dont fit between the brackets... if i flip the brackets its to wide.... any pictures would really help, the instructions supplied SUCK! thank you Josh Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted September 19, 2009 a picture on here might help http://cgi.ebay.com/NEW-Creation-PCUT-24-25-Vinyl-Cutter-Plotter-w-Stand_W0QQitemZ280398388706QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item41490bdde2&_trksid=p4634.c0.m14.l1262 Share this post Link to post Share on other sites
zx360 0 Posted September 19, 2009 the legs is what got me, i was looking for a flat side but didnt think to look from the top... when i did i noticed the bevel, i had the legs flipped... silly stand is harder to use then the cutter Share this post Link to post Share on other sites