neron15210 10 Posted January 15, 2009 I have to do my first enclosed trailer 20'x8'. Simple lettering , but a LOOOOOOOOOTs of rivets. I have a roller pro (hope it will help) Any advice will be more than welcome. Thanks Share this post Link to post Share on other sites
bayshorecreations 30 Posted January 15, 2009 Th e Rolle Pro is awesome! Leave a channel of air all the way down, heat with a torch and roll over it! It takes some getting used to so take your time and do some test spots first. If you are having trouble with the Rolle Pro here's another trick I learned that works very good. Take the cap from a Sharpie Marker, the opening on the cap is the same size as trailer rivets. Poke 4 holes in the vinyl around the outside of the rivet, heat the vinyl and press the Sharpie cap over the rivet. Take your time and be patient! Good luck! Share this post Link to post Share on other sites
neron15210 10 Posted January 15, 2009 Thanks Bayshorecreatios. I've offered customer two options Oracle 651 and 751 He wants to go with 651 (he does not keep trailers longer then 5 years) I assume 751 would be easier to work with. Should I have troubles with 651? Share this post Link to post Share on other sites