lcd screen black line then fades out

[Charles Pratt 0]

I have a 630 was running fine, but now when powered up lcd screen comes on

with black line of boxes but shortly fades away. I have checked the stops and

are working properly. Pulled the mother board nothing visibly smoked one chip

looks more distorted and bubbly but I am not a proffesional! I have checked all

connections pushed down all chips. Usually when powered up we here sylenoid

engage on cutter nothing there now, but can take off-line and move cutter

back and forth,and role vinyl, but when test is run no pressure on cutter but completes

tests. We can send job and is cutting job with no penetration of vinyl. It seems to

me after reading everything I can get my hands on in here for 2 days the mother board

is bad, but at the end of all discussions that was never a deciding factor. If anyone could

help please! I am loseing time and patience! Thanx X-treme

[luder 0]

check out my have 3 jobs to do post,how long have you had the machine? later........... luder

[kenimes 43]

Sounds to me like you have checked everything I would have suggested, so I think we should try a motherboard replacement.

[Charles Pratt 0]

Ken thanx for responding ! I'm back in business they sent me a brand new

machine.  I am so happy at least now we can fill these Christmas orders! I was

getting really anxious but it all worked out ,also off the subject of us this site

is a great tool,we have learned more about what we are doing in the past few

weeks then in the whole year and a half in the business. Thanx Too All

[kenimes 43]

Ken thanx for responding ! I'm back in business they sent me a brand new

machine.  I am so happy at least now we can fill these Christmas orders! I was

getting really anxious but it all worked out ,also off the subject of us this site

is a great tool,we have learned more about what we are doing in the past few

weeks then in the whole year and a half in the business. Thanx Too All

:thumbsup: