stanger

When I create a text file using sure cuts alot and make the cut it comes out fine. When I import an image and cut it comes out horrible. What am I doing wrong? Thanks!

1. For a while I was getting eratic cuts, everybody suggested it wa a static electricity problem so I grounded the stand to the cutter and it went away. 2. During the middle of a cut, the machine will just stop. Sits there, does nothing. Like it locks up. 3. If it doesn't lock up, during a cut it will freak out and then keep cutting a line down the entire roll of vinyl until I can get over there to stop it. I'm looking at multiple yards of vinyl that has been ruined because of this. It just won't stop. This is the 34" SC model using Sure Cuts A lot Pro.

I tried the serial cable that it came with (to the new serial) and the LED is blinking and not making a connection.

Thank you very much, I owe you a hug for all you've helped me with. I'll have to order the adpater but will now.

ok so I need to get the adapter and a null modem cable?

I used an alligator clip from the roller bracket and the bracket that the plotter sits on, so far so good

Ok, I'm back with 2 new issues. Sorry 1. I'm getting lines cut for no reason across the vinyl and it ruins the others I'm cutting out. I was told it could be static from the vinyl or system but I have no clue. It just did it again and cut a line across every single one making them bad. 2. See attached picture This just started. These deep gouges on the roller line. What causes those? (btw I brightened it up quite a bit so you could see it) Thanks again everybody!

Thanks. I'll see if some alligator clips might help

Just tried it again. When it got to the last letter of the last cut, it took off down the roll and cut a line almost 3 feet before I caught it.

thanks everybody for the help, I learned several new things now. When I was looking at it in photoshop, the outline effect was set so that's what was messing me up

The good news, I'm getting better. But I still have questions. When I take a regular picture I find on google or whereever or a decal I want to try and make, it put it into Inkscape and convert it to a vector. What is happening is that it's cutting an outline and I'm guessing it's because of the shading on the image. So, for an image, it's making 2 cuts around the outer edge. When I blew up the picture I see this. Is this the problem and if so how do I fix it?

What I didn't do was change it to "2" colors for just black and white. After I did that it looked much better. Thanks for the help!!

here's a better shot of what I'm talking about

You guys are awesome!

ok I searched but didnt' find anything and I'm very happy with the group that has helped me out already, so with that I want to throw out another question: I'm seeing marks from the knurl of the roller on the vinyl. I thought at first it was because maybe I had too much pressure on it but I turned it down to 18 and still see them. I also loosed up the tension on the handle as well.

thanks everybody for your help, you got me where I needed to be going. Now to post up my next question

The video on US Cutters youtube channel tells everybody about the 1/2 credit card depth. When i was setting the depth I tried doing cuts by hand to make sure it wasn't going to deep and adjusted accordingly. Here is the cut with the new file that was sent to me - major kudos! So, I'm guessing it was a file problem on my end.

the red ones cut out just fine and didn't go too deep so I feel its set just fine

the boost decal is almost 2x as tall but about the same width - yeah I see I did forget to weld them

yes

Here are the ones I did before, they turned out great. Then I got brave to try a graphic and then boom!

yes for some reason it tried to cut it twice, but the first time it was messing up as well. I had just printed out 12 decals that I did with text only on Sure Cuts that looked great and didn't cut through

it didn't cut good at all, if you look at the bottom you can see the edges

Ok so I took the picture I was working on and had it show the nodes. Tell me what you see.

Is the sure cuts able to handle most things?