jmatson

These are ok. I have some. and found they come off very very easy.. The sides were peeling off within days..

I have looked at all of the other post for tinker bell. And couldn't find one my client ones. Here is a pic of what she is looking for. This was drawn by hand in 1965

I am looking for a vinyl printer but i can't afford to speny more than 1000 on one. have they came out with a more affordable one?

I have the 3300 I like it. Don't run china ink it will clog. I've done 3600 prints since dec with out no problems using subli ink. I did try to save money and used ink from china and it clogged after 70 prints. I use the Ricoh for sub only. I have been lookin at the 1100 for sub also so I can do larger prints but doing decals sounds good also but my cutter doesn't do the cuttin around edges

i was looking at one of those the other day for my sublimation. using a Ricoh right now.

I am looking for some paintball Signs Goggles On. Barrell Condoms on type signs wondering if anyone had them already made up.

does anyone have any of these signs? Thanks Slickhick i did grab that opening my field at the end of the month

I talked with US Cutter about this. THe MB went bad. Actully the Memory did. SO i just sold it on Ebay for 375$ yes i got 375$ for that cutter with a bad board and bought a Copam and i love the copam allot better. nicer cuts and it's allot quiter also

does anyone have the Support of Troops Ribbon. I have one but i need the Flag side of the Ribbon in very bright Vivid Colors

i am having problems with the holder dragging and the vinyl is lifting on fine small edges. no matter what i try it still does it

ya.. THere is little help. I just got a set of ink in from Canada i am going to try out. i paid 200$ and got 100ml of ea ink. I'll see next week how it's going to work out i;m almost out of ink than will switch

I seen this at WM and loved it. Does anyone have this or can anyone do a really good vector?

super thanks. going to surprise the wife. I might get killed

here is my First Iphone case Wish the case was Black

It's great it pisses off the Apple store people

i noticed everyone on here is running at 100g+ I just got my cutter yesterday. i am using clean cut blades. the stock blades SUCKED. i am running 30g it's cutting really well i had to play with it at first but just did my first cut with no problems

I am looking for someone that can design or has a hoosier tire with Tiara on top and a stick figure chick

correct you don't. but they look like junk if you stretch them. when i talked to Sean yesterday he said they didn't have the vector for there graphics. they don't print them they have other people do it

anyone can do a really good vector on this so i can print it

correct. they are allowing me to print it on mousepads mugs and stuff. just they don't have a vector of it

my unit is grounded very well. right into the house wiring and to my stand it's on. and still got the same problem. First cut is fine but the second one. It paused cut straight and than resumed

hey guys I got the same problem. Today i cut 4 decals. 2 where trashed it didn't finish cutting the inside of a A it just moved to the next cut but drug the blade the whole way. and it happened on the same side both times. Here is a pic of another image you can see. the cutter pasued than drug the blade straight and than resumed cutting

Does it kinda look like this. Mine is doing the same thing. I just cut 4 things out and it killed 2 of them. it didn't finish cutting the center of the a out. but it drug the blade to the next cut. Here is a Pic of a larger cut. The cutter Paused drug the blade and than resumed

Ok i have been using this cutter for the past yr when no problems. Just recently. It's starting to stop cutting for a brief second and when it starts it doesn’t resume its path just cuts a straight line. I talked with support they said it doesn't normally happen until this thing is at least 5 years old. Said it might be my image so i went and downloaded the image again it worked for bit. and now it's doing it for just about all my cuts. If the cut is simple it doesn't do it. I just cut a 24*24 decal out and it's trashed. I also had to recently slow the cutter down to 30 at 40 where i have been running out just started skipping. even with new blades and the pressure up so high it would cut through the vinyl in certain areas. It's getting to the point i have to cut two of any item and hope 1 will cut out correct. i just cut 4 items and two were bad.

anyone have any suggestions