ky1duck

Members
 View Profile  See their activity

  • Content Count

    15

  • Joined

  • Last visited

    Never

Posts posted by ky1duck

  1. Posted

    ;D has any one found a 64-bit driver that will work for cutting direct from corel x3. use to us ce1000 win is was running winxp but now i cant find and compatable 64bit drivers for vista. thanks for your time.

    duck

  2. Posted

    after applying lettering to a semi truck, look great then after 1.5 days there r air bubbles popping up, i put them on wet using water/soap. washed truck first aint sure of vinyl company/type. looked great when first done. now getting airbubbles. what did i do wrong.

    thx rob

  4. Posted

    i am trying to find a pow-mia graphic and the one they use for the end of the trail of tears. havent had any luck finding a clipart program/ cd that has these 2 on. i have no problem paying for the artwork. i am wanting to cut it to place it on our semi.

    thanks.

    rob

  5. Posted

    i have tryed using the trace, but witch one there is quick trace, line art, clipart and a few others all under trace. depending on witch one i use, it eather prints a big box, dose nothing, or draws a bunch of strange shapes. i still think i am doing something wrong.

    rob

  7. Posted

    this is going in the back window of our pickup, and if u can tell we r otr truck drivers. there is 3layers on the truck black/silver/black

    i dont think i did bad for a second try with vinyl.

    post-759-1298651240594_thumb.jpg

    post-759-12986512419059_thumb.jpg

  9. Posted

    i got my new mn721 to direct print/cut in coral x3. now the problem i am haven is how do i convert bmp. files into sonething that i ca plot using pens, i  attached  the file i am trying to work with have saved it as a cdr, couldnt upload a bmp file.  what do i need to do with it or how do i do it. i know the 721 i working because if i drac a bunch of lines on the page and tell it to print i dose just fine. can make it draw it as a vinyl cut out but i only want it to have i line not a cutout. i think that sound right.

    thx

    rob

  10. Posted

    i was woundering if any one has been able to get a mh721 to print and/or cut from coral x3 yet, i have been trying al day. tryed using the ce1000 drivers and installed like talked about in this tread, but when is dose try to cut all i get is a bunch of little lines or i get a bunch of long boxes. heck i even tryed using the pnc1000 drivers with no luck.

    thx

    rob

  14. Posted

    just tried using text and had the same problem, did a name that was 3.5 tall and 8.5 wide, but after sending to signcut and telling it to cut, it cut the name at about 9hi x 24wide. all numbers are in inches

    thx

  15. Posted

    ;D i use coral x3 layed out a simple checkerboard pattern, .5 x .5 inch that was 3"wide and 8"long but after sending it to signcut-x2 and telling it to cut the squars cut at about 10" x 10". any idea what i did wrong or is there a problem with signcut using the same size as coral x3. thx for your time.

    duck