ky1duck

has any one found a 64-bit driver that will work for cutting direct from corel x3. use to us ce1000 win is was running winxp but now i cant find and compatable 64bit drivers for vista. thanks for your time. duck

after applying lettering to a semi truck, look great then after 1.5 days there r air bubbles popping up, i put them on wet using water/soap. washed truck first aint sure of vinyl company/type. looked great when first done. now getting airbubbles. what did i do wrong. thx rob

thanks you just made my wife happy. rob

i am trying to find a pow-mia graphic and the one they use for the end of the trail of tears. havent had any luck finding a clipart program/ cd that has these 2 on. i have no problem paying for the artwork. i am wanting to cut it to place it on our semi. thanks. rob

i have tryed using the trace, but witch one there is quick trace, line art, clipart and a few others all under trace. depending on witch one i use, it eather prints a big box, dose nothing, or draws a bunch of strange shapes. i still think i am doing something wrong. rob

everthing i read says if doing a wet apply, everything says use application fluid. was wounder it i can use the same thing (1quart water mixed with about 5 drops of dish soap) that i use in window tinting. thx rob

this is going in the back window of our pickup, and if u can tell we r otr truck drivers. there is 3layers on the truck black/silver/black i dont think i did bad for a second try with vinyl.

ops forgot file elf.zip elf.zip

i got my new mn721 to direct print/cut in coral x3. now the problem i am haven is how do i convert bmp. files into sonething that i ca plot using pens, i attached the file i am trying to work with have saved it as a cdr, couldnt upload a bmp file. what do i need to do with it or how do i do it. i know the 721 i working because if i drac a bunch of lines on the page and tell it to print i dose just fine. can make it draw it as a vinyl cut out but i only want it to have i line not a cutout. i think that sound right. thx rob

i was woundering if any one has been able to get a mh721 to print and/or cut from coral x3 yet, i have been trying al day. tryed using the ce1000 drivers and installed like talked about in this tread, but when is dose try to cut all i get is a bunch of little lines or i get a bunch of long boxes. heck i even tryed using the pnc1000 drivers with no luck. thx rob

yes they r was my first time layering too.

here r a few pics of the first thing i have ever cut and put vinyl on. note the cig pack fo size. every thing but the silver was done on my new cutter. lettering, strips, checkerboard, roundels. thx

thanks guys, i got worked out, put in wrong numbers in the calabration screen. thx.

just tried using text and had the same problem, did a name that was 3.5 tall and 8.5 wide, but after sending to signcut and telling it to cut, it cut the name at about 9hi x 24wide. all numbers are in inches thx

i use coral x3 layed out a simple checkerboard pattern, .5 x .5 inch that was 3"wide and 8"long but after sending it to signcut-x2 and telling it to cut the squars cut at about 10" x 10". any idea what i did wrong or is there a problem with signcut using the same size as coral x3. thx for your time. duck