-
Content Count
201 -
Joined
-
Last visited
Posts posted by pyrophire
-
-
From Graphtec's Site:
NOTE: Cutting Master 2 for Adobe Illustrator® and Mac OS X Lion will be available November 15, 2011.
-
I had setup my Mac with this cutter before but then had the hard drive crash and I had to re-install everything, My problem. This time, everytime I start cutting it will barely cut and then say "HOLDING" any idea's this is driving me nuts
Check your software settings, I remember seeing an option somewhere for signcut or cuttingmaster that says "hold on color" where it waits for color switches to send the cut commands
-
I love my Imac (Power PC) but I hate that Apple is coming out with OS versions that force people to buy new (and expensive) hardware. AS much as I hate Windows, you never had to run and buy a whole new computer just to install the latest OS.
I am very happy with leopard and I think I'll just keep it.
Actually microsoft did just that a couple of times, if the os checker didnt think your hardware was new enough, it would cancel the install before it even started. Mac's have been using intel processors for over 5 years, most people have updated their systems to take advantage of updates.
-
Since it doesnt support power pc apps, CuttingMaster is disabled now. Now to figure out how to get my cutter back online...
-
I've been using frog juice for a couple of years now but am looking for an alternative that provides a glossy final product instead of a matte/satin finish. Has anyone found a product that works well with inkjet vinyl with a gloss finish preferably in an aerosol can?
-
Great job Toolman! I started with an air eraser, advanced to a blasting cabinet, and am about to purchase the pencil blaster. I am addicted to etching glass. I am ready to start selling all the stuff I have etched.
You should sell your stuff before you start upgrading to more equip, stuff might not sell and youre stuck with equip that doesnt bring in money and items youve made that you are going to end up using yourself
-
AI with signcut pluggin. done.
-
lol ive never used the discs, they always have old drivers. osx keeps the drivers updated and gets the newest one when you plug it in.... its awesome.
-
I buy rolls and cut them down, its pretty price up front but the mark up makes up for that.
-
People read their owners manuals or actually open up whats on those disks?
-
you need to merge everything into a single path so there are no overlaps
-
I've had my CE5000 for about a week and I started using CuttingMaster2 to cut instead of signcut since my signcut requires a yearly subscription. I've noticed that some of the cuts arnt 100% cut and I was looking for an "overcut" option in CM2 but I cant find it. How have you all fixed this problem with incomplete cuts using the stock blade with factory settings on the CE5K?
-
Charge by the square foot because you will have waste, and why loose money on vinyl which could technically be a decal? Prices should cover vinyl, weeding and install, along with any materials you might need.
-
I've actually downgraded to a 24", nothing I do is larger than 24" so why have a huge machine. Chances are that if they want something 30+ inches, a big company can do it for cheaper.
-
My version of signcut had the Refine MH-871 option on there and worked better than the roland driver. Listed it right away on the usb options too, not sure why others dont see it listed on their macs.
-
I put it to GPGL and it worked lol
-
I used cuttingmaster and signcut only, I'm on mac so I dont know what the graphtec software is... if there even is one for mac
-
Just got my CE5000-60 today.... I have signcut installed for my Refine871 and it works great with the graphtech, but I installed cuttingmater2 and the plugging for illy and when I sent a job to the cutter it gives me a HP-GL Error 1. Ive done a reset on the software and cutter and still have the same problem. I've done the reset that I found here and still nothing. Id like to use the cuttingmaster software and not just the signcut.
Sorry for that run on statement.
-
You should look into injket vinyl, it is matte and will accept paint/ink/marker better than standard vinyl.
-
this is a first for this forum. people usually jump at helping me with some graphics. i do it very sparingly, so im not that versed like others. i've supplied many graphics to others, so i dont think asking for simple help is a major deal.
Why do you have to lie? In your past 20 posts, since March of 2009, about 18 of those are asking for graphics, the other 2 are asking for help because you applied a decal and it bubbled up. So it is not a "first." Anyone can view your previous posts, so saying that you've supplied many graphics to others doesn't qualify when its YOUR graphics that you need work done to. So my previous statement still stands, and I say, Good Day Sir!
-
now that i took at look at your previous posts, it seems all you do is ask for other people to do your graphic work. you need to learn the software before you take on another client, do your own work and stop trying to get others to do it for you.
-
you seriously cant make one? its an r and a circle... cant get any simpler...
-
to Eli http://www.pyrophire.com
Send me an email and lets see if we can work something out (contact page is on my site)
-
Legit and Eli you got some nice cards there too.
Thanks, those are some things I threw together for the interview of the job I have now, obviously they liked it at the newspaper, enough to hire me lol
OSX Lion
in Mac Users Board
Posted
CuttingMaster 2 has been released for OSX Lion. Available here: http://graphtecamerica.com/support/