-
Content Count
1,459 -
Joined
-
Last visited
-
Days Won
38
Posts posted by Sue2
-
-
Beware of customers bearing eps files!
Just last week one of my customers sent me eps vector files for HTV on Hoodies... I was tickled...getting cut ready files seldom occurs. AND, of course, 3 out of 6 turned out to be raster images she brought into Photoshop and then saved as eps files. She had no idea she wasn't providing files I could cut.
The best though was a few years ago...a t-shirt file that came in as an AI vector file...again, I was tickled...until I looked at the wireframe outlines. OMG.....it was a mess of pieces on top of pieces...see attached. Scarecrow came to my rescue on that one...welding & simplifying it for HTV.
- 2
-
My first cutter was a LaserPoint 2 from US Cutter...that was in 2010...it did the job well and I learned vinyl cutting on it.
Forward a few years and I found a used GraphTec CE6000-60.
Last weekend I was really impressed again with what this machine can do. My sister found a design online that she wanted on a t-shirt...it had a lot of tiny dots, florals & curls. I had to trace the graphic, cut & apply. I was worried about the tiny detail in the floral graphic....BUT the GraphTec did an amazing job without a problem. Check out the attached photo...that's the tip of an Exacto knife.
Sue2
- 4
-
21 hours ago, Dakotagrafx said:print doesn't require vector but getting people to understand a large enough high quality raster image is needed is like pulling teeth . . .
YES...running a copy/print shop, I deal with this all the time. Low resolution graphics & photos that customers expect to enlarge to posters, yard signs & banners!
AND , of course, they usually don't have logos in EPS format....or have deleted some of "those" files because they "wouldn't open."
I usually have to re-make the eps files or find the high resolution photos if possible.
Merry Chritsmas!
Sue2
-
Opened in CorelDraw X7 but not in Inkscape.
- 1
-
Sorry, Find My Font couldn't find it.
- 1
-
A special THANKS to all who take the time to help here on this forum!
Sue2
- 3
-
LOL.....the ultimate fix!
Always my FIRST step.
- 1
-
It should handle the svg file.
-
Don't know what your bow looked like to begin with so it's hard to tell you what to do.
If it was a color outline of a bow you traced you will get a trace of that outline...
some trace programs will give you the inside fill as white....some not.
Try hand outlining the bow for your customer.
Sue
-
Is the bow you have a vector file?
-
A quick fix: If you change the color of the "piece or pieces" you need, then go to CUT, you should be able to just cut that color.
Sue2
- 1
-
Backstab Personal Use (Regular) at DaFont
Compliments of Find My Font
POOR PHOTO...too dark! Had to take it into Photoshop to increase the brightness & contrast.
- 3
-
Find my font...
Concielian Bold (Bold) (Free at Dafont)
Sue2
- 1
-
Do you all enlarge the size of the imprint/graphics for the larger size t-shirts? Say...XXL - 4X
If you do, do you charge more for the larger imprint size?
TIA
Sue2
-
Thanks WG for the Siser Metalic review!
I was able to cancel it since it hadn't been shipped yet.
BUT, don't know if I would order from that "Nation" again. I placed my order on 9/2...a partial shipment (luckily without the Metallic) wasn't shipped till 9/6 and won't arrive here until 9/10. Yes, I had a 10% off coupon and free shipping so the savings was worth it....but I would have liked to be cutting this shirt order this weekend.
I had added the Metallic as a trial....is there any Metallic that holds up?
-
Great....news!!!
I just ordered some of the Siser Silver Metal!
Sue2
- 1
-
If you are that busy you should be putting some aside for upgrading your equipment.
If you are that busy and do not have extra to set aside you are probably charging too little for what you are producing.
Just my 2 cents.
Sue2
- 3
-
-
And it shows up better too!
- 1
-
Find My Font says:
Amplify Personal Use Only (Regular)
at Dafont
Sue2
-
It's the difference between:
Just spending money and spending money wisely.............
Sue2
- 2
- 1
-
Did you convert to curves first?
Sue2
-
3 minutes ago, bill9000 said:That was kinda my fear, I didn't know if there is a such thing as UV protected vinyl with front adhesive. Does this even exist?
Most all of your VINYLS are UV protected...the problem is the adhesive which would be facing the outside/sun.
The adhesive would have to be specially made to stand up to the UV...I don't know of any.
Sue2
- 1
-
"Would any one have a good high res image of this eagle? I need to print it out in large format on my versacamm. Thanks"
Wait...you did originally ask for a copy of the file to print....not how to locate the copyright owner.
Sue2
- 1
Manipulate Text
in General Help
Posted
In CorelDraw it is called Text on a Curve or Fit Text to Path..