greens14

any updates Karl?

What do you charge per sq ft for vinyl. basically to cover some windows. RTA vs installed. its a 2x5 window, and Three 4 by 8 windows.

A) no mention of type of vinyl (Oracal 651) no mention of weedability (no weeding, it's a box/square) C) Logo involved? Need vectored?? (no logo, no design) D) Design time? (none) he just wants blanks to cover up some windows like tint.

Thanks for the responses. I was at $185.00 installed.

The window is 4x5' with nothing on it at the moment. Thanks, H

Nice job!!

I have a job for a new store front. Front window LOGO 48" x 30", 2 colors, Below it would be phone#, and about 6-8 Words of services the offer. letters are approx 5" tall in White. on the door would be the same logo as front window, but 20" x 12" plus a hours sign. Above the shop would be a big sign that I would need ladders to put up. Its about 11 feet up. I need to remove some old vinyl and install a new 100" x 20" white sign. Lets say everything is simple weeding, on 751 cast and I designed everything. what would you charge for everything installed.

Thanks for the reply. I got the job at $650. this is my first real job!

how much longer would you say 651 would last over printed?

Nice!!!!

OK, LUCKY FOR YOU, I also have 7.6 go to lower left hand corner,,, under properties, it says JOB DEFAULTS on a button., click it,, then you should see the blade on the upper right, click it.. nowyou should see knife offset half way down,,, THANK YOU! THANK YOU! THANK YOU!

I have a job for a new day spa. Its for a front window 8' x 8'. I was thinking of some type of floral border. Anyone have any ideas for this? TIA

Thank you, but I guess older versions don't have that option. looks like i'll be upgrading soon, since I want to switch to Mac.

How would I adjust this on flexi starter?

looks great. how did you actually get the curve correct? Whats the thought process behind replicating it?

nobody uses alstyle? 6.1 oz 1301 here.

Wow. Great work on your first job! I wouldn't even know where to start on a quote. I'll post up my first sign job when I get some pictures. Do you have any pictures of the sign before installation? I see alot of finished work, but I would also like to see the process of how you guy split up the sign to print. I think it would benifit us to see how everyones work flow is.

IF this were your job, would you leave the back and just overlap? Moto, If you use illustrator. go to object>path>divide objects below. (EDIT:Sorry, didnt know i was in INkscape catagory)

Seems like everyone is using Sign cut. Is there an alternative to it. I do all my designs in Illustrator, and just need a software to cut. I am currently sending all work to the PC to cut. what are you guys using? TIA HC

Flexi starter is what I have on my pc. I've been using it for a few years now. Where can I get a copy for mac? Thanks.