-
Content Count
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by nnancyyta
-
Windows 10 support
nnancyyta replied to uncivil's topic in USCutter Refine Cutting Plotter Discussion
You mean? ... Finished the game with Windows 10? -
Sorry! ... I owe the images because they are not as attach. Good night.
- 7 replies
-
- Error Cut
- Random Lines
- (and 4 more)
-
Hello I have problems with my U.S. Cutter MH 721 Plotter - Sing Blazer MK2 and software. When I try to send a cut from the Sing Blazer to a measure of 157.4 ", suddenly the Plotter start cutting random lines and derails sideways. Sometimes I can control the diversion Vinyl sideways. But the truth is I puzzles cutting problem, because it does not cut the actual design, but rather lines damaging the material. because I tried to put a cardboard box on the Plotter to rule out the static. But the truth is no longer what else I can do. I wonder ... will I need to configure something else ... such as a controller or USB port? - He added that achieves cut before the problem presented ... 76.7 "Frosted Vinyl in perfect condition. - Thank you very much for your help, Nancy.
- 7 replies
-
- Error Cut
- Random Lines
- (and 4 more)
-
Hello! I tell you that I configure in options Sing Blazer PC, the baud to 4800, equal to the parallel Plotter in 4800. It turns out that until now, this cutting perfect. The only detail is that after cutting 8 feet, unfortunately I must disconnect all cables so you can cut the new vinyl tarp without errors. I'm already a little ahead of the process. I'm happy! Regarding the USB cable or Serial Keyspan ... and I commented that I turned out fine until now connect the PC with USB cable only. Communication has been positive. Regarding the U.S. Plotter Cutter MH-721 MK2 is not compatible with the Mac ... I commented that if it is fully operable but in this case the operating system SinCut connected right through the Keyspan and a serial cable. In fact I work so ... Here I leave a link and all the readers for your Plotter configured as needed. http://start.uscutter.com Accurate picture below I could solve! ... Thanks and happy weekend! ... A Design! Nancy.
- 7 replies
-
- Error Cut
- Random Lines
- (and 4 more)
-
Hello! Thanks for your answer! I tell you that I have the Keyspan USB adapter. But I thought this was only for connecting to a Mac Plotter fact because I got so connected to my Mac Plotter. But in this case, what I want is to connect the plotter to the PC via the USB cable. Unless there is another way? ... Because the truth is that I can not cut with a plotter. Do not send the designs to be cut and if you send makes random cuts. As I said before is hopeless. I need help! thousand and a million thanks!
- 7 replies
-
- Error Cut
- Random Lines
- (and 4 more)
-
Hey you! excellent reply! now that I can not cut more than 96. "But I tell you that when you try to cut 78.74", also would cut Plotter from Sing Blazer. I uninstalled the USB cable and turned off the Plotter, to test if the memory information is erased, but still the error persisted. Do not cut the Plotter and when cut, cut with random lines and I damaged the vinyl!. It is maddening! Help please! Right now I'm going to try programming the baud rate and port configuration. Help please! I await your response. Greetings.
- 7 replies
-
- Error Cut
- Random Lines
- (and 4 more)
-
Hello I have problems with my U.S. Cutter MH 721 Plotter - Sing Blazer MK2 and software. When I try to send a cut from the Sing Blazer to a measure of 157.4 ", suddenly the Plotter start cutting random lines and derails sideways. Sometimes I can control the diversion Vinyl sideways. But the truth is I puzzles cutting problem, because it does not cut the actual design, but rather lines damaging the material. because I tried to put a cardboard box on the Plotter to rule out the static. But the truth is no longer what else I can do. I wonder ... will I need to configure something else ... such as a controller or USB port? - He added that achieves cut before the problem presented ... 76.7 "Frosted Vinyl in perfect condition. - Thank you very much for your help, Nancy.
-
I think the best you can do ... is to design work in Illustrator ... create mounting it on the canvas with the size of your Plotter Sing Blazer and export as Illustrator document. "eps", so that you manage to open it as import Sing Blazer. When you go to Sing Blazer, you're cutting the cloth you need already adapted in Illustrator, of course ... adjusted only to the output window cutting Sing Blazer for classic cuts with normal configuration without configuration Mosaic. This will is less tragic. Greetings.