JoeBlow

I tried it and found I'd wasted my money Joe

I emailed this guy offering help 11days ago but he never got back to me, he's either sorted it out or sold it and I'm tipping he sold it. Joe

JogaShop there's a time in life where you either want too learn or you don't and I think I know where you're at Pal. I wouldn't work myself it someone would do it for me, but I think I would start to feel a bit guilty in a very short time. Forums work well when everyone puts in and contributes. This is only the second time I've spoken out at anyone and the other time was for the exact same reason. There's no hate it's just someone trying the help you make an effort to learn for yourself. Joe

http://www.cutreadyclipart.com/TUTORIALS_windshield_text.html

This previous thread may help you with a scale for modified cars and be a lot cheaper than buying software. http://forum.uscutter.com/index.php/topic,19808.msg155474.html#msg155474 By photographing the vehicle you can then import the picture into your software and design over the actual photo and know your graphics will be to scale and fit the vehicle. Joe

It forces the adhesive down into the backing paper Joe

Spider I'm painting the house can you help me out while I drink a few beer? Joe

Funny Stuff :thumbsup:

try a different registration mark, a larger circle or square, keep trying until it's seen, I don't know what you're using now, but maybe it's too fine and gets lost with the gloss reflection. Joe

He probably would have wasted over $400 in photoluminescent vinyl with either the Roland or the Graphtec also, I don't think the plotter was his problem. Joe

01 is the way you AI file was, 02 is it cleaned up and 03 will cut. It may need a little clean up around the start of the "M" there's a small glitch I didn't have time too fix. Joe Thomas03.eps Thomas03.eps

Aluminium Oxide

+1

If you're using a serial cable you will need a driver and then add your plotter as a printer in Windows. Joe

Put in a card http://forum.uscutter.com/index.php/topic,30729.msg239576.html#msg239576 Joe

If the text is correct and the only problem is that it's on the top and not the bottom, just grab the little red square and drag it around the edge of the circle to where you want it. Joe

http://youthgrouptshirts.com/ygt/coreldraw-x4-adding-text-above-and-below-a-circle/ Joe

Also check your blade offset. Joe

First of all Mopar is 100% on the money if your PC doesn't have a serial or parallel port you will have problems. It does not matter which end the USB connection is it is a poor connection and is prone to working loose with any physical movement or vibration. It happens with your mouse, your printer, it's a very poor connection. A lot of people blame stray cuts from plotters not being earthed, I think you'll find that 90% of those stray cuts that the plotter stops 1/2 way through a job are cause by the USB connection. If your PC or laptop does not have a serial or parallel port buy either a PCI or PCMCIA card. Joe

Thanks

Joey I've NEVER slammed anyone before, you're the first. Being impatient will get NOWHERE fast pal, if you've done so much, just go away and do it yourself and stop being a jerk. Joe

Defiantly a doggy disc, Google copyright or Royalty free clipart and see what you come up with. Joe

Nice work Linda :thumbsup: Joe

I sent the EPS as well but it doesn't seem to be there. BGMS-00.zip BGMS-00.zip

Here's a few different versions, they will need a little clean up. Joe