Linda1
-
Content Count
51 -
Joined
-
Last visited
Posts posted by Linda1
-
-
I just checked on the silver bullet forum and here is what someone said about balsa.
The Silver Bullet can cut Balsa, the maximum thickness would be 2mm and would need the 60plus blade.
Here is the link to a discussion about balsa wood.
http://forum.silverbulletcutters.com/viewtopic.php?f=5&t=5248&p=90554&hilit=balsa#p90554
-
-
Linda1 - Those look cool. Is it like building a ship in a bottle, or what?Cal
I cut the clear transparency the diameter or the ornament. Cut my vinyl design, apply to the transparency then roll up the transparency and slip it into the ornament. It usually unrolls on it own and looks like it it floating.
-
2
-
-
Ornaments with the vinyl on a transparency inside seem to be a big hit this year.
Not a great picture
-
8
-
-
I made 3 of these magnetic signs for my husband's business.
-
1
-
-
Since I mainly just do crafts, I can use very small pieces. I put each color of small pieces in a clear page protector. Larger pieces are flat in an under the bed plastic container. Sure wish I lived near some of you that throw your scraps out!
-
It was brought to my attention that this is a copyright file. I'm sorry. I didn't give it any thought since I was just putting this on a mug for personal use. I removed the file I posted.
-
Thanks, guys. Jaybird, it cut great. Much faster and smoother. Thanks again.
-
I tried cutting this file, and I'm pretty sure there are duplicate layers. I use scal3, and tried to the simplify the nodes, but it made very little difference. In the layers window it had lots of blank squares that made no difference that I could see when I tried to hide them. It cut, but had lots of tiny slivers and took forever. Can anyone tell me how to fix these problems? Thanks.
-
As per request, here is a picture. Everything went well except it started raining. Removed a butterfly from bottom so we could move the entire design down some.
-
1
-
-
I'm worried because when I held it up to her car, it looks like I have to put it over the door handle unless we remove the bottom butterflies and lower the entire design.
-
Yes, paper tape! Thanks for the video. I had only found ones for small window decals.
-
My daughter bought this decal for her car and I would appreciate any hints and suggestions on how to apply it. I know how to apply large graphics using the hinge method on a wall, but not on a curved surface with door handles! I would have cut something for her, but I only have a 12" black cat lynx and would have had to piece it together. http://www.ebay.com/itm/321048706369?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
-
I used this site about a year ago. Since then it looks like you have to sign up. Anyway the attached file is one I made. It worked fine.
-
I have two labs. I do my vinyl work in a spare bedroom and I don't let the dogs in that room. Jake is blowing his coat right now and the hair in the house is terrible!
-
Thanks Jay.
-
I made this banner for my church and put it outside with a southern exposure. I'm in western Pa., so we don't have extreme heat. I put it up the first of August and when I took it down in the fall it was full of cracks. It was the 10 oz greenStar. I expected it to last a little longer than 3 months. I need to redo the banner and wondered what weight, type to order.
Pictures of the banner:
-
I just do this as a hobby, so use a spare bedroom. I bought this table and like it because it has a small foot print when folded and it is also higher than a normal table.
-
Thank you, mb20music!
I have used inkscape to turn jpg files into svg files. Most of the time I use a program called Sure Cut Alot, but it doesn't deal with the eps file format. Thanks again everyone.
-
Thank you both very much!
-
Would someone be able to covert this svg into a eps file for me? This is needed for a church project. I only have a cricut cutter and work with the svg files. Not sure what program to use to clean it up and convert.
-
I use the Siser EasyWeed with an iron. I have a piece of sheet metal that I put down on the ironing board so I can apply even pressure. A new cookie sheet will work too. I also put a piece of parchment paper on top of the easy weed before hitting it with the iron.
-
Haven't order from them, but plan to soon. Price for EasyWeed is $7.50 for a 15 inch by 1 yard piece.
-
Gee, a reason to get the camera out of the case! I'm not artistic, but love to play around with my camera gear.
Space evenly in SCALP 3
in Sure Cuts A Lot Pro
Posted
I have Scal 4. On the right hand side select the position and size tab. Put a check mark in the "to page" box. Then you can select your item and Align.