30-284
Members-
Content Count
298 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by 30-284
-
Switch to 651 or 751 for outside stuff as the 631 has a different adhesive and won't last long outside, sure don't want customers coming back for the wrong reasons. Donn
-
Frustrated. ... need advice.
30-284 replied to Grimey's topic in Business Practices, Sales and Pricing, etc.
Obviously fix it but, was the mistake yours or his? -
That would be a real job to weed!
-
Image cutting smaller than i created ?
30-284 replied to Primal Decals's topic in Sure Cuts A Lot Pro
Remember, it also will do the same thing with lower case g's and y's, anything that hangs down as well. Donn -
Cut it out in reverse so when you install on the shirt it will be correct.
-
If nothing else, use signblazer text follow arc, its so easy even I figured it out. and it works pretty good. Donn
-
Image cutting smaller than i created ?
30-284 replied to Primal Decals's topic in Sure Cuts A Lot Pro
Don't use the text size in the text properties box. Make sure you draw a box around the text and go by the size indicated in the position and size properties box. Donn -
Each line of text installed individually, cut from 24" vinyl. mark the vertical centerline on the window, then a horizontal centerline for each line, then install wet. Don't forget to mark the horizontal and vertical lines on ea. piece of vinyl. Most of the measurements could be gotten from the mat you design on. Donn
-
That's the way I've done it, get all of your measurements from the mat in your program.
-
Did you use registration marks to align the colors? or eyeball them on a light box.
-
So the Felix Chevrolet logo is public domain?
-
Never figured how to post a link on here but if you search 454 ss on brands of the world, you may come a little closer. Donn
-
You must be from out of town as its supposed to be 73 here today. Glad you got things going, I use scalp quite a bit, but use signblazer occasionally for things that I cant do in scalp, I just don't cut from it. Donn
-
I haven't either, I use Corel for that.
-
No problem.
-
Only thing I would know to do would be to print the pattern on a piece of vinyl and then insert it into the cutter and cut the owl pattern out of it, but that's because I'm not real up on all of the programs. Otherwise post both the owl and the pattern and I will make the file for you and repost it. Donn
-
First off the image would probably need to be vectorized, but even so, when you cut, the only color it will be is the color of your vinyl as unless your are using a printer/cutter this won't work for you. I did it in corel. Donn
-
Is this what you are trying to accomplish? Get the pattern to come thru in the owl?
-
Remember, the thinner the letters are the less of your logo or design within there will be to see. If that makes any sense. Donn
-
I have cut some very large files on my cutter and have never had any problem, worst thing that happens is that the cutter will stop for a second and then continue on without causing any problems and you can never tell where it stopped at. Donn
-
It should as I do that all of the time, if nothing else post it here and I (or many others) can open it and convert it to svg. Donn
-
If you use the search then you would find this from a while back, just the rip, add your own baseball. Donn Rip.EPS
-
When you say it first printed or cut one way then traveled the other way(at least this is what your picture makes it seem like), it may be simply returning to its origin, or where it started. Donn
-
I use sure cuts a lot as well and have not had any problems like that. Donn
-
Does it look ok when you preview it? it sounds like you have had this problem with 2 cutters is that right? You could always download signblazer as it is a free program and try that to see if the problem is in sure cuts a lot.