-
Content Count
17,529 -
Joined
-
Last visited
-
Days Won
498
Posts posted by MZ SKEETER
-
-
there is one hole for the holder, the offset setting, is that on the machine somewhere as well as in the software, or only in the software? I was afraid there would be limited input on this machine, being new.
Thanks again
go thru the menu on your cutter, put most of the Chinese cutters don't have offset on cutter, Just the software.
-
make sure your com ports are still matching. Also If you are disconnecting your cutter/ computer. not a good thing. You should leave it as a dedicated cutter/computer. , don't keep unplugging it.
-
those cutters are too new for us on the forum to troubleshoot. Nobody has one. Is there two holes for the blade holder? Possibly one in front one in back? If so, pen goes in front. For pen offset is 0 for cutting you start at 0.25MM and adjust your machine
-
If your machine does not have a reset button, you can activate one of the kill switches on either side of the machine.
-
have you tried resetting the kill switch?
-
I may be jumping the gun, but, I received my new plotter a GC-721 goldcut. I got it before my vinyl order showed up so I installed the plotter pen and started my trial and error. I first ran the test function before connecting to my computer. drew the star w/ a box around it... didn't close the box.. now I am connected to SB trial and have done some simple text, and again doesn't close 1/2 the characters or more. I run the SB test sample, again its not closing everything.. Where do I look to correct this? or should I wait until I try to cut vinyl? if it doesn't plot continuous I dint see how it will cut differant..
Settings on my machine are: cut speed 165mms cut press 130g up-speed 120mms and baud 9600, Any help would be great, I will be VERY disappointed if I have to re-cut all my work by hand everytime.
Thanks
what driver did you use for your setup? JUst curious
you may find your solution here. download on first page,
-
also on long tracks like that , I would not use weedlines, if you are.
-
I have tried this in Inkscape (still learning) and illustrator. and i can't get it to turn out right
THat is Oregon state logo as stated above
http://www.sportslogos.net/logo.php?id=q0fwmexextfff4zw0uk70jtkx
Ohio State
http://www.sportslogos.net/logo.php?id=2ljfrxdhjejmccpdr5ccycxi2
-
-
Yes I am. read the Newbie Manual. which is what I just gave you. Also why download the Flexi driver pack if your going to use the Roland driver? try using the driver for the cutter you bought. listed under USCutter. .
-
-
the font has a 2 circles on it, and other weird stuff in it. It needs to be welded because lines are crossing on it. That is the way the font is made.
It is just the font parchment capital B,, once you zoom it, you can see all the weird stuff on it.
-
let's start here, Did you download the font Parchment? Are you just typing the font capital B in pachment on your screen in Signblazer? Then trying to cut it in Signblazer? This font really needs to be larger than 4" to make a good design, It is very detailed.
-
if you have't done it yet, put a support ticket in and also call them Monday.
-
your files will need to be saved to an older version such as version 8 .eps. Signblazer has not been updated for years, as owner passed away a few years ago. So is older software. and make sure your files are vector files, not raster, such as jpeg or bitmap,
-
all images have to be vectorized (Changed from raster image to outline) for your cutter to cut them,
Sounds like you need to start here
-
FIRST post, first link. I just tried first link, works fine I am downloading now. after you click the link, go to this
SBE_W_Setup.exe
-
-
A Keyspan adapter is the brand name. Not all usb to serial will work for a vinyl cutter.
-
put it on a serial card or Keyspan adapter, get away from USB. Serial is a better connection.
-
are you sure your com ports are all matching? In Signcut, and device manager? You could submit a ticket and have US Cutter do a remote and check your computer. Better do it quick, it is the weekend. Are you sure you have the correct drivers downloaded? You can find them in support at top of page.
-
you cannot run your cutter thru a hub. It has to be direct from computer to cutter. get a Keyspan adapter, that is the brand name. that is a secure tight connection. and I have read to connect to the back com port . more power,, the best thing is have your cutter on a dedicated computer, with nothing else connected to it. You can still purchase XP older units that work great.
-
Hello, from North Manchester, In, 40 miles SW Fort Wayne. welcome
-
ok I removed my statement. LOL
USCutter Driver Pack
in Flexi
Posted
yes, the side switches are kill switches. and reset switches