Mstrbd

well whaddayaknow hooray for noobies!

disassembled blade holder blade holder with push rod in screwed all the way in screwed in so only the tip shows screwed in, zoom in pics clickable for higher res. what i dont understand is how unscrewing it will help because the blade would still be the same distance from the bump, meaning its still too low. also, if i unscrew it unitl the blade is barely showing, its only holding on by a thread and the cap is wobbly.

the holder and blades that I'm using came with the cutter

that is kick ass!

this is what im looking at the black plastic screw-on part is screwed in all the way and the blade still sticks out. my understanding is that the blade holder should go on the carrier like so: but like that, the blade is too low so i set it up like this but the carrier screw is actually holding the plastic part of the blade holder, so its not adjusted correctly and i'm guessing that is why it cuts unevenly

bump?

hello i got a mini-cutter the other day and have been having problems with the blade, while cutting a design, it will barely touch the vinyl on one side and completely cut through the base on the other i read the blade adjustment thread and it says that the blade should barely stick out of the holder, and on mine, it sticks out quite a bit, i have tried pushing it in, but no luck. are there different lengths of blades? am i missing something? please help out a cutter noob TIA