BCOJdecals
-
Content Count
200 -
Joined
-
Last visited
-
Days Won
2
Posts posted by BCOJdecals
-
-
The right side of my image will not stay clean even if its the same points as the left.This is hard to explain in text but easy to see in the pictures.
When mirroring the image and uploading them at the same time the left side is perfect but the right side is bad has any one ever seen this before.
perfect in illustrator, bad in SCA
Haven't really messed with SCAL, but I did notice something...probably nothing, though...but the pic on the right seems a little (albeit very little) bigger than the one on the left...might be an extra layer. See my pic...the spaces in the one on the right are definitely bigger, even in the pic where the two are welded.
-
Just cut it with your cutter...even if the tracking is off a bit, it's still going to cut the shape that's programmed in...even if it is slightly off as compared to the edges of the waste.
-
I switched over almost exclusively to using paper tape, but when I was buying clear tape, I was using RTape Clear Choice AT75 and was happy with it.Yeah, this stuff is pretty great for clear, but I also switched to paper a long time ago.
-
That was pretty cool. Seems very time consuming, though.
-
I've wondered this myself...there's got to be a video on YouTube about it...
-
Good idea...if you have Photoshop, add an outer glow to it of the same color. Then, if you have Illustrator, try using image trace on it with the outer glow already applied.
-
I've used it on 651 before...actually used to use it all the time on 631 and 651...works fine.
-
That's about as loud as mine gets (very quiet in my opinion)...be glad you didn't buy a cutter with a stepper motor.
-
mark-s is correct, as usual...it's Rock Salt. The "L" in both words is uppercase. The rest of the letters are lowercase. You can download for free commercial use
here.
-
-
40...and almost retired. Looks like one more year-long tour to Korea in late January, then back to the states for me...couple more years, then I'm OUT!
-
1
-
-
-
Anyone have any? My fiance's friend is looking for one for her car to replace her stick family...Found this, and like it, but figured if anyone had anything else to share.
http://img0.etsystatic.com/022/0/6668619/il_570xN.490481242_t35j.jpg
You can pretty easily design your own school...here are some Harry Potter-like fonts you can use: http://www.mugglenet.com/downloads/fonts/index.shtml
-
Looks like great fun, but in reality...it's freakin' insane! haha
-
Not this guy. And free shipping...
-
Rad!
-
I use the same setup as you...same cutter and software...however, I don't create my files in Illustrator. I create them in Make-the-Cut, export as .eps, then open with Illustrator to send to CM3...no issues whatsoever.
-
Attached it to a PM for you.
-
You'd have to do a copyright search (or Trademark, probably) to see if it's still open or if it's dead.
-
Definitely an old roll...had the same thing happen with a roll of 631 Gentian Blue. Chuck it...you'll find it's very difficult to lift the backing off as well once you have transfer tape on it.
-
Thanks for all of the replies...it would be really nice to have a local supplier...I envy those of you who do.
-
Hey guys, I've been using Oracal 651 for most everything, but for the longest time I've been wanting to try 3M...can anyone tell me which 3M vinyl is comparable to 651 and where the best place to get it from might be (online)? Thanks in advance.
-
I don't know much about SignGo, but try downloading the file in .eps format maybe? Or export the .cdr as a .eps file.
-
Yeah, I noticed that with my order last week...no biggie, though...way cheaper than anyone else.
cutter quality
in USCutter Equipment Feedback or Suggestions
Posted
Better than a Graphtec? lol