Dragonduster

why dont you ask him the max size of the window? i dont think he doesnt have anything to measure it

dam =\ i wanted to use the usb since my room doesnt have much space and the cutter only be in front of the pc, behind me and i connect it from the front usb of my desktop =\ guess i will have to make some changes, thanks for the help guys, really appreciate it.

lol i got hooked already!!!! i did something for my parents restaurant, the letters saying from what time to what time opens and what day closes, but in some parts like in the M, it has some wave from the inclined lines only, also it didnt cut from the 1 to the E as shown in the picture, i did 2 of the same since its 12x12" i did it 2 times to get the 12"x24" (the size of the vinyl) the first one got it all cut fine, except from the wave lines, but the second one, went from the 1 to the E and the letters between them didnt cut any, just a straight line from the 1 to E.

yes, thats what i mean volt, also how to remove the big ones while not removing the small ones? i will upload the EPS so u can see the difference, just look at the nose Stu: thanks, i picked it from a template tho, i didnt make it xD Cowboy: yes, mine had some dent marks too and thats how i removed them with my fingers

thank you, any tip you could give me? i just started with this

than you very much for your help, one last question, in signblast, what cutter should i chose? once i connected the cutter, windows automatically detected it, i havent installed any drivers but i can see it in signblast as "Blast COM3: USB serial port" thats the one i chose as for cutter i cant see SC UScutter and my cutter doesnt have a serial number or model number also every time i finish sending the file to cut and it finishes, the plooter stays in "now is cutting..." even tho it finished cutting.

try with a different EPS

well when i lock the rollers, i cant move the vinyl, so i guess thats good right? also i put the roll on those tubes and they roll easily, also i found out the box where the cutter is wasnt in the trail? i dont know how to call it, but its where it rest in the machine, there is a band that moves it and the box is on some bar, i adjusted it now tho. how much should i let the blade out of the blade holder?

i see, thanks i have another question, i just powered it on and did a test with the greenstar vinyl, how much force do i need to set it to? or speed? the vinyl says its a 3.0 thickness but i dont know how much force i should set it up for that, also with my test, the lines werent straight

hahaha ur cat do a facepalm when u make a mistake? thats truly a smart cat!!

well i have my tablet with a textured carbon fiber and i was impressed with it that i wanted to spend money to get my cellphone, laptop and desktop with carbon fiber lol its expensive as i tried to search for it too, but they feel very good at hand, i havent touched the carbon fiber looking ones, but i dont think they will feel like the textured ones (also it made my tablet feel more solid)

你好， 欢迎

nice to meet with all of your..... ninja!? hehehe on topic, after watching ur decals, even tho i havent received my cutter yet (will be here tomorrow or sat) im regretting buying the SC one i want a graphtec now!! i dont have the money for it tho but i want it :< and very nice work!! that baby will have a pleasant room and congrats!! (if that baby will be urs or family member, if not, forget it ¬¬ )

they tried to call my phone number, but since i live in Mexico, the number doesnt work can someone help me with this? lol i have an address i send my stuff to, then i go pick them up, but no phone number

$46 http://www.uscutter.com/UltraHEAT-Dual-Temperature-Heat-Gun-STSHEATSV800 $80 http://www.uscutter.com/UltraHEAT-Hot-Air-Tool-Kit-STSHEATSV803K same brand so the quality should be the same right?

if ur talking about the link, it works for me, but use this link instead www.3mgraphics.com/samples if you check the link of OP, the link i gave you is the last part of his link, i ordered mine already, hope i can get them soon =D

well all you need to do is go to paypal and make an account, give him ur paypal account only, he sends you the money, receive it and send it to ur bank, if u get the deposit, u can send him ur rig with confirmation or registered or something, but tell him you will only send to paypal verified address only, that way he wont be able to scam you, if u send it and asking for a signature, even if he report to paypal, u can just give the proof of shipping it and with the number they can track it and will see its signed already. i have bought A LOT and sold a lot on ebay, i have had bad experience too but after doing that, i havent received any complain and havent been scammed

here? http://www.uscutter.com/White-Bleached-50-Kraft-Paper-Assorted-Widths-by-1100-Roll-B-TUSKPAPER

i see, i guess i will have to buy the heat gun then and a tennis ball i found UScutter sell the heat gun and the heat gun kit, what does the kit has that the gun doesnt have?

some months late i guess, but i get my fronts from http://www.1001fonts.com/ they have a ton of fonts you can chose from and as tshirt said, if you add too many fonts, it will slow down a little ur programs, get a SSD hard drive and it will improve

how much did u charge for that? or was free?

hi, i have been reading the forum for some days and decided to register today. i am new to all this, i bought the vinyl long time ago to make some letters and weed them in a window for my dad and i did all the cutting manually, its A LOT of work to draw the letters, then cutting them without error >.< then he asked me to put the phone number too..... i decided i should get a vinyl cutter to make my life easier, and i would use it for personal uses (modding my pc) but since i will have the cutter, i could get some cash doing work for other people so my question is, which cutter should i start with? i want to buy the 34" one at least but i see there are many models and i am not sure which should be good for me. any advice will be welcomed.

lol i did, and i decided to get the SC of 34", thats when i found them having different bundles on ebay with flexy 10 free

lol he complains they took 14 days to ship it and i complain they shipped it in less than 1 hr and i couldnt change my order because of that =\ but not like i will leave negative feedback for that or anything. i have bought from ebay a lot and i had spend a lot of ebay bucks (60 dlls this first quarter) UScutters have free shipping in ebay, but the item is more expensive there, i compared 2 items and the diference in price was 9 dlls, but u get ebay bucks reward (not much, but little by little makes a lot) but since i would buy more stuff, its better to buy from UScutter webpage than ebay.

i havent had any. anyways i decided already and bought a bundle that UScutter was selling in ebay and this will be weird but i am disappointed that UScutter ships too fast!!!! i saw 1 bundle with flexy v10 with dongle but was a 25" and had bundle for Tshirt heating decals, i found another one that was vinyl cutting only and was 34" so i bought it, then noticed it had corel draw x3 (that i have already =\) and i didnt noticed t until i was telling a friend all the accesories it had, then noticed it, i found a 53" one with flexy 10 for 130 dlls more, i tried to cancel my order (but i always pay once i ake purchase) and asked UScutter but they told me they were packaging it already and couldnt do anything about it, the only thing i can do is return it once i receive it, there will be a 20% restocking fee and then i could buy the 53" one, thats 90 dlls more than the $130 i was planning to spend all thats lest if to see if someone around here wants to buy corel draw x3 lol no point having 2 same version of lisenced software =\