-
Content Count
53 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Gallery
Everything posted by PACS Man
-
I made some accent stripes in SBE and need to send them to a friend that does not use SBE. They can use the EPS but I cant get SBE to save as or export from or into the EPS format. Any ideas? I did search the forum and there were some hits but none that I could use. PACS Man
-
:- I love my Pcut630 but I want to try doing some contour cuting and would need to get a cutter that can do the contour cutting. I have kinda narrowed it down to the Roland or Graphtec for both price and features. The Graphtec gets a + cause I can get it from Cutter. Any advise is muchly appreciated! PM
-
Roland GX24 or Graphtec CE5000
PACS Man replied to PACS Man's topic in Creation PCUT Cutting Plotter Discussion
Thanks for the input everyone! I am now working on the "owner" for the funding Taking her on a Caribbean cruise tomorrow so I am hoping it will help loosen the purse strings. Ken, (or is it kimme) Does the Graphtec have any vinyl tracking like some of the higher end models? I get asked to make 40' x 1" stripes but think I need some sort of stable tracking to make them. There is an error when trying to download the info PDF for the graphtec on the cutter website and on the graphtec site so I was unable to check out the specifics on the tracking question. Will do some more googeling to see if I cant find that out. thanks again, Mark -
Very nice work!
-
Great Job!!
-
New to the group here is some of my work what you think
PACS Man replied to Chris H.'s topic in Show your work
Verry Nice work! -
OMG ROFLMAOWTIME
-
Our prayers go out to you and your husband. Stay strong. Mark
-
Glad to hear you are home. Take care and get strong. Slow and steady! PM
-
A 24"x12" painted pboard. 7 vinyl colors. The Let it Snow and little snow flakes are white reflective. The snowman scarf is reflective red. reflective white reflective red white forest green light blue dark blue black orange okay so only a little orange! here is an.eps of the snowman not much but it works. snowman.eps snowman.eps
-
I think I need to move the "Let it Snow" up a bit higher on the board...say 2/3rds rather than the middle. What do you all think?
-
Thanks Blue! Is that of your creation? Very nice. PM
-
Yes, it is a font called WWFlakes. There are about 90 different flakes. Some r a real pain to weed
-
Thanks everyone, I had a blast making it. Started out as just snow flakes and the words Merry Christmas but as I kept looking at it, I had to nitpick it and this was the end (for now) results. It didnt hurt having 2' of snow but I have to give credit to everyone here that has passed on their knowledge, creativity and motivation to all of us here in the forum. I would never have been able to make anything without all your help !! Mark (PacsMan)
-
Thanks for the update. John will be in all our prayers.
-
Have you ever read thier employee handbook? if you read it backwards........
-
My 2 cents: I have ordered from SignWarehouse many times this last year with no issues. I have also ordered from USCutter with no issues. SW does charge 20 - 40% more shipping than does USCutter for like items. I will be ordering any OraCal vinyl and app tape I need from USCutter in the future. PM
-
can someone measure their machine for me (asap?)
PACS Man replied to graphikta's topic in Creation PCUT Cutting Plotter Support Requests
here ya go 25.5" center to center of cutter rubber feet length wise 6" center to center width wise -
can someone measure their machine for me (asap?)
PACS Man replied to graphikta's topic in Creation PCUT Cutting Plotter Support Requests
thank you so much man!!! do you know the distance between the legs on each side? like between each : if this was the cutter footprint [: :] legs are 24" front to back legs are 33" apart -
can someone measure their machine for me (asap?)
PACS Man replied to graphikta's topic in Creation PCUT Cutting Plotter Support Requests
36"W 10"D 10"T 30.5"out side leg 28.75"inside leg hope that helps! -
I bought some of the BGS vinyl from USCutter and it cuts and weeds good but I cant get it to seperate from the backing using 3 different application tapes. The Arlon and Oracal have no problems sticking to the app tape. Any ideas? I spent over an hour using an exato prying the vinyl from the backing and pushing it to the app tape...snow flakes of all things. Ran the same jobe on Oracal and no problems. PM
-
Here is m first window clingy PPoWSUs Go Cougs!
-
Very nice work! PM
-
I read in a post somewhere in here that Signwarehouse has them