SignJunky
-
Content Count
123 -
Joined
-
Last visited
Posts posted by SignJunky
-
-
I went back and checked the temp all over in several places..... reading was the same across the whole top plate which is great news..... it is a little bit dirty, so I'll be ordering something to clean that with. I increased my pressure and my next print turned out better than the one I did earlier. I did forget to mention that I was pressing at 400 for ( 60 seconds ). Not sure if the time is a factor or not.
for my protection sheets, I use the paper backing that comes off of vinyl rolls...... would that affect anything??
-
I'll try to increase pressure...... using same blanks and actually tried some others. I get same results from both blanks..... I checked my heat with one of those actual gauges and it's dead on...... let me try the heavier press. Thanks for input!!
-
Some of my prints that I do on aluminum blanks have a splotchy look in the print...... hard to explain and I can't get a good picture to show at the moment...... but it's the most noticeable in black and red ink..... the prints look like it has clouds in it...... I use very high quality images..... and it's not every time. Not sure if I need to increase press or temp. I'm currently at a pressure of 1 on a Hix..... and temp of 400.
-
Mug
in Sublimation
Is she available for hire? LOL..... nice looking!!
- 2
-
thanks
-
What you guys suggest to use for vinyl going on forklifts..... it'll just be numbers around 20" size.
-
Got a business owner wanting pics of kids roller skating. Single skaters type designs so that they can be individually cut and made into some sort of " merry - go round " thing for Christmas. I found a couple that I vectorized from online, but needing about 6 different ones if possible. Anybody got something they can share? Thanks
-
Yea, that's what I had been doing, but thought maybe there was a shortcut / trick. lol.... thanks
-
Is there a way to manually change the size of a job in versa works without it being proportional? For example, if I have something that measures 12x12...... but want to change it to 12x13...... is there a way to do that?? Thanks
-
Dang..... I miss read from the very beginning. lol...... I read it as 2 and not 20.... my bad. haha
-
Make you a circle....... then make a 2 point horizontal line as wide as the circle....... then highlight both, the circle and the line and click "control c' then control e..... that will center and even both objects together....... then use your smart fill tool and click on one half of the circle..... there are other ways as well, but just one quick way.
-
Thanks.... yea, it's very close...... just that the edges were very jagged. I cleaned them up so I'm good. Thanks to both
-
I downloaded online, but my text is jagged???
-
-
Looking for a Roland GX 24 stand. Thanks
-
If you are going to be doing any shipping, I stand by the Rtape Conform..... this stuff doesn't tunnel like some of the other brands I have used.
-
I just upgraded my printer from SP 300 to the VP 300 a few weeks ago. I'm running into a problem as to where the width is perfect, but the length is coming up about 1/4" short on prints over 40" long....... I've changed the setting in VersaWorks to "Use Printer Settings" and on the printer menu itself ( calibration ), it's set to "0.00" ........ is there anything else I can try??
Thanks
-
I know price depends on region, but if buying the materials, how do you guys price this? Do you just figure your material cost then add labor or do you price according to other competitors?
-
We the people folks....... we the people......
-
- I got some collars that go on the ends of the pipe...... that I used to use...... I don't use them anymore. The pipe is nice and snug and doesn't move at all.
-
Eddie I heard a rumor you burned up a bearing? ?Nope.... not yet...... I keep her oiled down. lol
articmonster - man, this thing is nice....... next best thing to ( S3# ) .......
-
Dollar an inch, 12" = $12 and based on experience I adjust accordingly. If the job is out of your way figure 1 hour of your time 20 there, 20 install, 20 back. For me if they were decent people to deal with I'd just shoot over when I had a free chance and tell them the first install is on the house, however if they are the type that you really don't want to deal with charge them the full hour at whatever your time is worth (usually $30 an hour here). Most important is business is to use your own judgement in these cases.Just curious, but what would the charge be if you had a single lie text at 3" tall and 40" long? No install, just made from 651 vinyl. Thanks
-
how many are you looking to get printed?
-
Have you checked with Grimco and Southeastern Sign Supply?
Prints Look splotchy or cloudy looking
in Sublimation
Posted
no spray..... I use tape to hold the plates in place.