Lefturn

Ducky, Thanks Much

Thanks

Looking for Giddyup Font

Thank You

Thank You very much. Your input has been a great help.

NICE, Thanks for Sharing

Hi All, I have been looking for the cartoon character Hagar. I have tried to scan news print with no real success. No luck with Web searches as well. I am looking for Hagar standing and holding a shield. Thank You.

Thanks Stoke, I'll give it a try.

Hi all, I have been using the serial cable that came with the unit. I needed a longer cable to relocate the cutter. I purchased a 15 foot, 9 pin serial cable (DB9). This new cable does not work. Is there a speacial cable that is used?. I have a refine mh721,, serial connection with supplied cable(works great, just a little short), and using windows xp. I have tried different com ports and still had no success. Any help or thoughts would be great. Thank You

Thank You for Sharing

THANKS Fivestar, Works great. I did not think to connect the two cables together. Thanks a bunch.

Thanks sharing Jenny. I was just getting ready to start Holiday projects when I came across this post. This saves me a great deal of time. Somene must have been reading my mind.. Thanks again.

real nice, THANKS

Just stumbled upon these. Thanks Charlie

I am using a refine 721. I use 50-70 for the pressure and I set the speed depending on how much fine detail needs to be cut. I have found the finer the detail the slower speeds work much better. also a 60 degree blade seems to help with fine details as well. I use both 45 and 60 degree blades. The other factor I have found is the vinyl manufacturer. I use different pressure settings between manfactures as well as finish, ie gloss vs. matte. Best thing I found is to practice and experiment. Hope this helps.

Excellent tribal, Just what I have been looking for. Thank You!

I am having trouble getting cleaning up this image. I am having trouble with the small font. I have looked for this font too replace it instead of trying to clean it up but no luck in finding a match. Any help would br GREATLY APPRECIATED. Thank You school3.eps school3.eps

;DThank You, Thank You, Thank You. It cuts much cleaner and looks good. I messed with the design for hours and just could not get the small letters to look good. Greatly Appreciate your help. Thanks Again

Thank You!!! I will try it later tonight after work.

real nice

Thanks Pogo!!!!! tried everything except the right click. Thanks Again

Can you radius corners in SignBlazer? If you make a square with the square tool in the tool bar, I would like the corners to have a small radius instead of 90 degree corners. Thanks

www.blankapparel.com

I am doing the same as you are. Lap top is great for designing on the go. I like the PC for printing and designing at home as it is faster.