laserman70

Has anyone tried cutting mylar paper or sheets w/ their cutter? I am doing alot of airbrushing lately and want to make some templates. If you have please give me some feedback and where you purchased your mylar at. thanks Gregg

Lookied on the forum, I cannot find it. I am looking for the location of the chip on a refine 721. I know its on the motherboard, where exactly is the motherboard located. I took the right side off and dont see there, so i figured I would ask you guys for help. thanks

OK I am saving my work as an .eps in Illustrator. When I open it in signblazer, all i get is a blank page. Am i doing something wrong? I hear that vectormagic will be gone soon so i need to figure this out. I have version 6.021 with signblazer and CS3 in illustrator. Thanks for the help. Gregg

Thanks Jay, that works great ty ty

I have a graphic from a company. Is there a way to convert all colors to signblazer colors beside selecting each one. There are alot of small pieces in this graphic. Reason for converting is so i can put registration marks to get it all to work well. thanks

Yes it is from Greensburg. I do printer work for them and they want me to do some shirts for the IT dept.

Ok i have done this before but i think i have lost my mind and cant find it. It i have a 3 color cut, i want it to cut the background out in one solid color, not just the outline. so if it was red and black, black being on top. I want the red down first completely filled and then i can lay the blakc cutout on top of the red. Where is that at on sign blazer? thanks

I have attached the file. As you will see when you open it, the red it is outlined. Instead of being one full piece in the back of the grahic. GriffinSH.eps GriffinSH.eps

Regis, thanks for he response. I need to get it to cut without outlineing it. such as if i had a shield that was red and had black designs on top of it. The shield is cutting the places where the black is instead of just having it completly filled in red. thanks

I did this for a local drive in last weekend for their haunted drive in. This was definitley a first for me.

Dont we all. They all lost their jobs at the brewery. Sam adams uses the facility to put out 16 gal. and 8 gal. out. They only needed 10 people. Rolling Rock was a great beer it is a shame.

Great first and second. Createx is ok to work with, it takes a while to learn to get good flow and less tip dry. I use alot of auto air and Hok as well. Keep up the good work.

Great design, I like the colors and detail.

Great job

Nice logo

Great Job it looks fantastic

I split in two pieces. It was a fun project to do. Thanks for all the comments

Started doing some airbrushing on shirts. My girlfriends son wore a couple to school and all his buddies are ordering now, lol. Here is one i did last night.

It depends on the graphic wanted. If it is a stock design i have on hand one color its 40.00. If it is custom made and hand drawn it depends on the time involved. The one below the kid wanted the darknight large it was 65.00.

I use createx for shirts. Heat set them by using the heat press 400 for 25. Than i put them in the dryer for 45 min. They stay great and do not fade if they are heat set.

I thought one was posted here before but it did not come up in the search. If anyone has a graveyard scene i would appreciate it. thanks

Thanks Bannerjohn

Thanks Terry those are great

Here is a gear eps. Great for clock companies. I made it last night. gears.eps gears.eps

Bunch of tattoo designs and more here for free. http://www.vectorgraphics.info/vector-clipart.php?cat=tattoos