Turtlemechanic 4 Posted August 10, 2021 Hope this is correct area. Bought my SC cutter Christmas 2012, has worked great over the years, my specific XP computer passed away RIP. I have replaced it but I can not find my software disc after 9 years, noticed on uscutter site the software (Sir cuts alot) is available for download, BUT I need a serial number, I don't remember there being one. And apparently I have a different email It is in storage locker and was going to get it out this weekend and do some cutting Any help would be appreciated, thanks Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted August 10, 2021 You will have to contact Craftedge.com. They are the only ones who could help with a Activation number. Share this post Link to post Share on other sites
Turtlemechanic 4 Posted August 10, 2021 Okay sounds good, thanks 1 Share this post Link to post Share on other sites
slice&dice 2,450 Posted August 10, 2021 Hey, turtlemechanic, I have a really good suggestion for you ---- spend the fifty bucks and grab VinylMasterCUT. It's a very sophisticated program that you'll be happy with using for your work. Alternatively, give yourself a chance to see if you like SignBlazer, it'll run the SC just fine (use 'Liyu' for the model in setup). Not supported by anyone (except us, if you have specific questions, there are a few oldtimer users, including me, of that software). 2 Share this post Link to post Share on other sites
