Monkey 252 Posted August 26, 2016 I have a feeling I undercharged a lot for the recent storefront I did. Curious what some of you would have charged for this job installed. I offered them 2 prices, just cut for $190 and installed for $290 as I was hoping they would take the just cut as I was intimidated by the size at first. But wasnt AS bad as I thought lol. Windows are 66" x 82" and door is 30" wide to give scale. Share this post Link to post Share on other sites
Monkey 252 Posted September 12, 2016 90 views no suggested pricing? Share this post Link to post Share on other sites
busterbay 326 Posted September 12, 2016 I triple vinyl cost to calculate clean install, more if I have to remove old lettering. If you did it in under an hour then it was good money. Share this post Link to post Share on other sites
Monkey 252 Posted September 12, 2016 was probably about 1 1/2 to 2 hours since I did each line individually. Plus being my first store front and many eyes on me, I took my time. So if you have say $100 in vinyl cost (your cost not your price) you would charge $300 just for the install? Share this post Link to post Share on other sites
busterbay 326 Posted September 12, 2016 4 hours ago, Monkey said: was probably about 1 1/2 to 2 hours since I did each line individually. Plus being my first store front and many eyes on me, I took my time. So if you have say $100 in vinyl cost (your cost not your price) you would charge $300 just for the install? Actually if I made a decal with $15 worth of vinyl depending upon length and ease of prep I may charge $100 for the decal then 2 - 3x's that to install. Your mileage may vary depending upon location, sometimes you can charge more depending the area. 1 Share this post Link to post Share on other sites
Primal Decals 621 Posted September 12, 2016 This one i did was roughly 8feet x 9 feet .And it is layered ,Took me about an hour and i charged 350 and thats because they ended up buying a design for their vehicle with a name and paw prints in a different design.. So probly would have been about 325 minimum if it were me on your design installed. Thats a quick simple one to me. 1 Share this post Link to post Share on other sites
busterbay 326 Posted September 12, 2016 2 hours ago, Primal Decals said: This one i did was roughly 8feet x 9 feet .And it is layered ,Took me about an hour and i charged 350 and thats because they ended up buying a design for their vehicle with a name and paw prints in a different design.. So probly would have been about 325 minimum if it were me on your design installed. Thats a quick simple one to me. And I bet you cut it with Sure Cuts A Lot 1 Share this post Link to post Share on other sites
Monkey 252 Posted September 14, 2016 On 9/12/2016 at 4:50 PM, busterbay said: Actually if I made a decal with $15 worth of vinyl depending upon length and ease of prep I may charge $100 for the decal then 2 - 3x's that to install. Your mileage may vary depending upon location, sometimes you can charge more depending the area. Man maybe I did way under charge. I usually add 50% of what I charge for the material for install. Like here $200 for what I made, then added $100 for install. Just dont see being able to charge 2-3 times just for the install, even in my busy area. On 9/12/2016 at 4:51 PM, Primal Decals said: This one i did was roughly 8feet x 9 feet .And it is layered ,Took me about an hour and i charged 350 and thats because they ended up buying a design for their vehicle with a name and paw prints in a different design.. So probly would have been about 325 minimum if it were me on your design installed. Thats a quick simple one to me. So I wasnt too far off what you charge On 9/12/2016 at 7:37 PM, busterbay said: And I bet you cut it with Sure Cuts A Lot Just curious why you asked him that. Am I missing something in his picture? Share this post Link to post Share on other sites
busterbay 326 Posted September 14, 2016 @Monkey He is a Sure Cuts A Lot user as am I, so many people knock the program but it does what is supposed to do, cut. And this is a good example of it doing a good job at cutting. 3 Share this post Link to post Share on other sites
Monkey 252 Posted September 15, 2016 oh yeah. I use it also. Ive tried Flexi, signblazer and cut master 3 and Im back in SCALP. None work as smoothly as SCALP has for me. Its more user friendly IMO. 2 Share this post Link to post Share on other sites
busterbay 326 Posted September 15, 2016 10 hours ago, Monkey said: oh yeah. I use it also. Ive tried Flexi, signblazer and cut master 3 and Im back in SCALP. None work as smoothly as SCALP has for me. Its more user friendly IMO. I agree SCALP is very easy to use, draw / import and cut from. Easy Peasy Vinylmaster needs a "Cut Button" that just cuts what is one your screen. I put a ticket in for this and still has not been addressed. Share this post Link to post Share on other sites
Monkey 252 Posted September 15, 2016 I design in Coreldraw X7 and use the add on to send straight to SCALP. I didnt like the pausing in Cutmaster and flexi just felt clunky. I do alot of multiple decal orders so the pausing in between rows in cutmaster was annoying to say the least. 1 Share this post Link to post Share on other sites
busterbay 326 Posted September 15, 2016 2 hours ago, Monkey said: I design in Coreldraw X7 and use the add on to send straight to SCALP. I didnt like the pausing in Cutmaster and flexi just felt clunky. I do alot of multiple decal orders so the pausing in between rows in cutmaster was annoying to say the least. I agree, Coreldraw x7 & SCALP here also, I may have 10 to 15 tabs in a daily SCALP file with 30 plus designs at any given time. SCALP is built for production. I cut one order in VM and that was enough. I do use VM to make my contour projects it excels at that, but I cut them in SCALP. 1 Share this post Link to post Share on other sites
DNA_Vinyl 262 Posted November 1, 2016 On 9/12/2016 at 11:05 AM, Monkey said: was probably about 1 1/2 to 2 hours since I did each line individually. Plus being my first store front and many eyes on me, I took my time. So if you have say $100 in vinyl cost (your cost not your price) you would charge $300 just for the install? Ugh...the "many eye one me"...I dread. Share this post Link to post Share on other sites
Sortee 11 Posted November 14, 2016 is that Duffs behind it lol Share this post Link to post Share on other sites
Primal Decals 621 Posted November 14, 2016 32 minutes ago, Sortee said: is that Duffs behind it lol yes it is and my car lol Share this post Link to post Share on other sites
Sortee 11 Posted November 14, 2016 nice lived in anderson for years 1 Share this post Link to post Share on other sites
Primal Decals 621 Posted November 14, 2016 On 9/14/2016 at 1:49 PM, busterbay said: @Monkey He is a Sure Cuts A Lot user as am I, so many people knock the program but it does what is supposed to do, cut. And this is a good example of it doing a good job at cutting. Sorry for the late response... lol...Yes i am a Scalps user.. Scalps 4 pro now actully. I upgraded from 3 pro. Just love the program along with ai Cs6 and or cc... Between the 2 its the perfect and simple software combo... Share this post Link to post Share on other sites