tozito 0 Posted July 19, 2014 Hi forum. I'm trying to get this work with my redsail but can't get it work.Cutter just doesn't mouve. The only thing I've been able to verify is that data is coming out of the COM port. Just wondering if there's something I've been missing! Is the comunication protocol choosen directly from the cutter model, or can I choose it somewhere else? Any advice's welcome, Best Regards. Share this post Link to post Share on other sites
slice&dice 2,450 Posted July 19, 2014 What Com port? Share this post Link to post Share on other sites
tozito 0 Posted July 19, 2014 What Com port? thanks for your reply. I've tried with onboard COM port but also with an USB/COM converter. Also selected the rigth comport each time. To test if something was coming out from the computer I've connected it to another computer's comport and with Terminal I could get the data coming out SIGNBLAZER. As an example if I send the "Home Position" command I get this: IN;PU0,0; Share this post Link to post Share on other sites