aaron hooper 0 Posted April 17, 2012 im using flexi on a vinyl express r31 speed 200 pressure 140. im doing a say 20 stickers with just an "ML" and about 3 of every 20 will have the L cut in half and im kinda stuck. any help would be greatly apreciated. photo attached. Share this post Link to post Share on other sites
Dr12volt1338 116 Posted April 17, 2012 If you are using a USB get rid of it and either get a keyspan adapter or use a serial port. The VE series USB drivers are junk.... I have an r31 and had way to many issues on the USB Share this post Link to post Share on other sites
aaron hooper 0 Posted April 17, 2012 Wow thanks a whole lot its working great now. i sincerly appreciate it. Share this post Link to post Share on other sites
AbsoluteAirbrush 33 Posted April 17, 2012 If you are using a USB get rid of it and either get a keyspan adapter or use a serial port. The VE series USB drivers are junk.... I have an r31 and had way to many issues on the USB I second that, same thing here Dr! Share this post Link to post Share on other sites
Dr12volt1338 116 Posted April 17, 2012 I ran mine for about 6 months with a USB and wasted rolls of vinyl..... Once I went to a serial connection the only vinyl I waste is from my own doing... and 99% of the time it's because I don't weld text where the fonts overlap.... I know there is an auto weld feature but that doesn't always seem to work either Share this post Link to post Share on other sites