Stonewall 0 Posted February 29, 2012 Hi guys, just bought a ZenCut Black Cutter from US Cutter. I have a question that should be pretty easy for some one to answer, but I have been to dumb to figure it out yet. How can I import a picture into my Flexi Starter software and have it reconize the image as a cuttable object? I have tried the basic copy and past and it will show the picture on the screen in flexi but when I go to cut/plot it says no objects to cut in drawing area, or something to that effect. Any help would be greatly appreciated. Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted February 29, 2012 Hi guys, just bought a ZenCut Black Cutter from US Cutter. I have a question that should be pretty easy for some one to answer, but I have been to dumb to figure it out yet. How can I import a picture into my Flexi Starter software and have it reconize the image as a cuttable object? I have tried the basic copy and past and it will show the picture on the screen in flexi but when I go to cut/plot it says no objects to cut in drawing area, or something to that effect. Any help would be greatly appreciated. It has to be a vectorized image for it to recognize it. It can't cut jpeg or bitmap images. It must be an .eps .ai etc. vector image. Share this post Link to post Share on other sites
hharley3059 1 Posted February 29, 2012 Yes your image has to be vectorize to cut you can take a jpeg or bitmap and vectorize it with flexi 8.1 or above or use Vector magic is another easy one other then that find and use EPS files for cutting Share this post Link to post Share on other sites
Stonewall 0 Posted March 1, 2012 Awesome thank you guys so much. That makes sense. Share this post Link to post Share on other sites