designed 0 Posted December 10, 2008 Say I had a 15" vinyl and cut only a piece that 7" x 3" the cutter stops behind the cut when done so I move the horizontal and reposition it next the first graphic I cut and and press enter to let it know to start there but when I click cut it repositions itself behind the first cut and begins. I want to move across the vinyl horizontally not vertically to start the cut what can I do to stop it from repositioning behind the first cut? Thank you for some help here. Share this post Link to post Share on other sites
cutme 5 Posted December 10, 2008 when you get the cutter where you want it to start, you have to hit the "origin" button in the middle of the keypad to reset the origin where you want it. bb Share this post Link to post Share on other sites
designed 0 Posted December 10, 2008 hey cutme, I don't have an origin button anywhere any other idea's Share this post Link to post Share on other sites
kenimes 42 Posted December 10, 2008 hey cutme, I don't have an origin button anywhere any other idea's Instead of pressing the Enter button when you get to the new starting position, hold the Enter button down for about 3 or 4 seconds. Share this post Link to post Share on other sites
designed 0 Posted December 13, 2008 Yes that works great thank you Share this post Link to post Share on other sites