Dazzel me

Can you PRINT on HEXIS White Board Material? I bought this stuff for a customer THINKING I could but I cannot find a profile for it at all! Thanks for any help!

I cant believe I didnt ask this question B4 buying it! WHat a duuuuuf! I am trying all sorts of gloss "slick" vinyl profiles B4 giving up! Thanks

Yes...from Toyota themselves. Thank You

Hey there, Weird thing happening! I am printing some Toyota Logos and when it comes time to cut (around each circle), it cuts off my image. Even the "Cut Image Boundaries" cut is off. Anyone know whats going on? Thanks Carmen Toyota Logo_PRINT.pdf

Hi there, This logo I have created doesn't see the cut lines around all the pieces (its going on a vehicle). When I take the graduation away it sees it just fine but as soon as I put the graduation back in versaworks it doesn't see the cut lines. I tried putting the cut lines on a top layer , didn't work. I tried flattening the image, din't work, I tried a whole new document, nope....any advise? Western United Fish.pdf

So, in my quest to get this figured out, I realized its the gradient that is messing with me. As soon as I delete the gradient I see all the little ants dancing around my image in VW :/ DAZZEL ME is baffled I tried both eps and pdf

THANK YOU Mark, my Versaworks only really likes pdfs, but I will try. AN eps is rather large so its taking its sweet time saving! Fingers crossed as I have been trying to find a way to get this done for 2 days Usually I have to flatten everything and as Wildgoose said, sometimes the cut lines need to be on top. Mark I did have the cut lines on my file, they were pink WIll let you know of the eps worked! Thanks

Yes Indeed.

Oh and....PLEASE AND THANK YOU I am so frazzled at this moment I could scream!

I looked there as well but found nothing, thought maybe I was wording my SEARCH wrong but I put every possible case scenario in there and came up empty! Soul from USCUTTER is going to do some research on it for me, he and Brandon usually come over when my Machine is sick and fix er all up Thansk Dakota for responding and helping

Hi there Anyone know WHY thin streaks of Magenta and Yellow are going in a versicle direction of the material? I have 2 of the exact same images (18" x 24") side by said and if you are looking at the printer itself, the image on the right side is printing just fine, the image on the left side has the 2 streaks going through it. I recently had a head strike (I know...OUCH), and it was after that, that it started happening. I did a deep clean on the machine as well as took the lids off and swabbed it down then did some test prints and the test prints show all colors in alignment fine! Any idea what it could be?

Thanks Dakota, Roland SP540V

Sorry, Magenta and Cyan!

I have this LG stuff from USCUTTER that I really like becaus it's thick, great for signs! However, when I put it in my Roland SP540V (with long guards down on both sides and 4 rollers) it ripples in the center of the vinyl causing the ink to not lay down properly in the rippled area. ANyone know what causes this and how to fix it. I tried turning off Heater, cranking heater up and everything in between. I had it set to "Printer settings" and now I tried "default media settings" as the material itself is Orajet 3628 and it has its own heat profile settings! I am printing a wall mural (152"W x 89"L) so it's a large coverage and any booboos would be seen in the sky area! Thanks Carmen

SOLUTION.....print with print head on HIGH!

Thanks Dakota, I do use this stuff for RealEstate signage and yes, its awsome for short runs....I did some wall graphics with it a few years ago in my house here and it's held up pretty good, thats why I dont think I am too concerned about doing such a large print. I will try the vacumm and see what happens!

How do you get a tag line at the bottom of your messages? Thanks Carmen

My how things have changed since I last visited this Forum over a year ago! I like the NEW look! Now I need to re-familiarize myself with lot's of new people! Lot's of good stuff here! I hope to be of some help to whomever needs it! Carmen

Thank You!

Figured it out...it is Castellar just in case anyone wanted to know Carmen

Been a while since being on this forum.....I guess LIFE happens! Can anyone tell me what font this might be...be racking my brain trying to figure it out! ANy help is MUCH appreciated! The font in question is the word "MANTE" CArmen

Has any ever heard of printing on Poly Satin Material with a Roland SP540V? I need to make some huge flags and was told there is marterial out there that I can purchase to make them. Thank You Carmen

Grabbed it Thank you....saves us a lot of time!

LOVE IT Did you design it too? Also, did you put that on as one piece? Carmen