drdancan

Mostly just lurk but do appreciate all the fine folks posting various files to this forum. Using a Laser Point 24 bought in late 2007 and Signblazer for the most part. Just acquired the little 12" Refine on Ebay from US Cutter and am having a ball using it to make use of small scraps laying around. Hopefully the Memory file will help a few folks out. memoryJD.EPS memoryJD.EPS

I'm not having much luck finding a Rattlesnake I can work with. It's going on a t-shirt and would like to have a good view of head with fangs exposed. Help Please.

I've been using myfax.com for two years now, no complaints and no junk mail or faxes from them. You get a Toll free fax number too. Dan LaserPoint

Thanks for the vector... will post picture when I get the shirt done... Me and Inkscape are getting to know each other just need some more time in the day LOL...

Thanks Everyone. Eric, sure wished that was an eps file... I wouldn't weed it for heat press vinyl but would color it up and print it out for inkjet transfer. Dan

Using a 25 ft. serial cable here to LaserPoint 24 with no problems ever.

I've had good results with the heat press vinyl I got from http://www.heatpressvinyl.com . Small company and Roger has great service. Plus his rolls are 19 inches wide and available by the foot. No affiliation just a satisfied customer. LaserPoint 24

Using a 25 ft. serial cable to LaserPoint 24 with no problems here. Never tried USB.

Thackerville, Oklahoma originally Floydada, Texas

Just something the better half and I did today. We have been playing with the LaserPoint for a couple of months now and it has worked well, no problems so far. This was our first attempt at layering and it went ok using Corel and Signcut. We have SignBlazer but just have not gotten as comfortable with it. Thanks for all the help here on the forums. :thanks:

Maybe this will work donkey001.zip donkey001.zip

Could use a hand with this. Trace in SB or Inkscape smooths the edges. I am trying to keep the edges as is. Attached is the original, and a black and white I am trying to trace. Thanks, Dan

Thanks Mark

Looks like you do not have the blade holder seated properly. With it that high the rubber o ring at bottom of blade holder is not functioning. Hopefully I got a picture attached for you.

I agree that heat presses are not complicated. 400 shirts later the 15 X 15 three month old China press I have is working just fine. I have seen this same press on some of the suppliers sites that has been rebranded and a bit higher price. ebay works for me. I too was curious about the wooden heat presses on eBay. Think I will buy one just for a backup. Dan

Just noticed a 48 inch Laserpoint listed on Ebay today. Item # 270196893520 http://cgi.ebay.com/LaserPoint-48-Vinyl-Cutter-Cutting-Plotter-w-Stand-NR_W0QQitemZ270196893520QQihZ017QQcategoryZ26245QQssPageNameZWDVWQQrdZ1QQcmdZViewItem According to the listing the software has been released.... Wonder when we it will be made available to those of us who have already purchased the 24" Laserpoint ? Dan

I just got one of the new LaserPoint machines. I thought at first it was not coming on and had to get really close and at the right angle to see the LCD screen. It is functioning but not easy to read. Of course these 50+ eyes may have a little to do with that. If this is normal I don't know. I haven't time to do anything but power the machine up while I wait on a longer serial cable to arrive. This is all brand new to me and hopefully I can get going this next week. I do have the small Craft Robo I am using to cut t-shirt transfers and am hoping with the software upgrade this will be possible on the LaserPoint among other projects. Hopefully there will be much more on the forums about this machine. The forum has already been a great source of information Dan