pandimus 0 Posted September 21, 2008 Hey all, Hi im brand new here. We just bought a laserpoint. We have a designer doing most of our stuff, but i tried a few things myself. It took me ahwhile, but i drew a window sticker i had lying around. But when i exported as an eps and put into flexi, it started to cut, but then stayed in the same place and just cut a big hole in my vinyl. If ya'll can look and help a brotha out, Id appreciate it. thanks Johnny PEACEBUFF.eps PEACEBUFF.eps Share this post Link to post Share on other sites
pandimus 0 Posted September 21, 2008 also a key point to note, it seems its only doing it on the text Share this post Link to post Share on other sites
Jay2703 704 Posted September 21, 2008 The B52 had an extra outline around it. The lower text was duplicated numerous times. It looks like the letters were welded together with a duplicate or something. Look at the picture. I unstacked the text. Share this post Link to post Share on other sites
pandimus 0 Posted September 21, 2008 Thanks for the info, any idea why corel would do that? ive tried several different times to redo that text, and alway the same thing.. Johnny Share this post Link to post Share on other sites
pandimus 0 Posted September 21, 2008 I just did a completely new one, of just the ring with text and it still does it. I tried just text and it works fine. So it seems it is something with the way the worlds are arching around the circle that does that. Share this post Link to post Share on other sites
pandimus 0 Posted September 22, 2008 Nevermind, converted whole thing to curves and it cut out like a champion.. Thanks for the help Share this post Link to post Share on other sites