CyberSultan 6 Posted August 23, 2008 I bought mine at a craft store the other day (Joanns). It is a really nice Fiskars punch that normally costs around $11, but was on sale at 40% off. I like this one, because the punch itself is visible on top...so you can see it line up and make any adjustments before punching. So for about $7, I'm good to go. Now I just need to buy some magnetic material. http://www.joann.com/joann/catalog.jsp?CATID=cat2785&PRODID=xprd316102&source=search Share this post Link to post Share on other sites
Cuttter 1 Posted August 23, 2008 How are you'll cutting the roll to get it strait and square? I purchsaed a Drywall T-Square from Home Depot and an exacto knife. Perfect every time, you don't have to cut all the way through (do the cut on the front side), just enough to fold over the back and pull it will do the rest. Share this post Link to post Share on other sites
Cuttter 1 Posted August 23, 2008 Looks Like this, http://diy.homedepot.ca/HomeDepot_Images/diy/157_01_01_HI25601.jpg http://www.main-e-acs.com/images/t-square.jpg You need to purchase a long one. Share this post Link to post Share on other sites
Cuttter 1 Posted August 23, 2008 I bought mine at a craft store the other day (Joanns). It is a really nice Fiskars punch that normally costs around $11, but was on sale at 40% off. I like this one, because you the punch is visible on top...so you can see it line up and make any adjustments before punching. So for about $7, I'm good to go. Now I just need to buy some magnetic material. http://www.joann.com/joann/catalog.jsp?CATID=cat2785&PRODID=xprd316102&source=search I get my roll of magnetic material through Graphic Solutions Group in Dallas Tx, 24"X10' is 29.07 thats 2.91 for 1 12x18. Now for shipping the roll I don't know. Cause I always pick mine up. Just thought I would let you know. Share this post Link to post Share on other sites